521 lines
19 KiB
C
521 lines
19 KiB
C
/*
|
|
******************************************************************************
|
|
* INTERPEAK CONFIGURATION SOURCE FILE
|
|
*
|
|
* Document no: @(#) $Name: VXWORKS_ITER40_2019102207 $ $RCSfile: ipppp_config.c,v $ $Revision: 1.36.10.5 $
|
|
* $Source: /home/interpeak/CVSRoot/ipppp/config/ipppp_config.c,v $
|
|
* $Author: jren $
|
|
* $State: Exp $ $Locker: $
|
|
*
|
|
* INTERPEAK_COPYRIGHT_STRING
|
|
* Design and implementation by Lennart Bang <lob@interpeak.se>
|
|
******************************************************************************
|
|
*/
|
|
|
|
|
|
/*
|
|
****************************************************************************
|
|
* 1 DESCRIPTION
|
|
****************************************************************************
|
|
*/
|
|
|
|
/*
|
|
****************************************************************************
|
|
* 2 INCLUDE FILES
|
|
****************************************************************************
|
|
*/
|
|
|
|
#ifdef IP_PORT_VXWORKS
|
|
|
|
#include "ipppp_config.h"
|
|
#include <ipcom_type.h>
|
|
#include <ipcom_cstyle.h>
|
|
#include <ipcom_sysvar.h>
|
|
#include <ipcom_err.h>
|
|
#include <ipcom_shell.h>
|
|
|
|
#else
|
|
|
|
#include <ipcom_type.h>
|
|
#include <ipcom_sysvar.h>
|
|
#include <ipcom_err.h>
|
|
#include <ipcom_shell.h>
|
|
#include "ipppp_config.h"
|
|
|
|
#endif
|
|
|
|
/*
|
|
****************************************************************************
|
|
* 3 DEFINES
|
|
****************************************************************************
|
|
*/
|
|
|
|
/*
|
|
****************************************************************************
|
|
* 4 TYPES
|
|
****************************************************************************
|
|
*/
|
|
|
|
/*
|
|
****************************************************************************
|
|
* 5 EXTERN PROTOTYPES
|
|
****************************************************************************
|
|
*/
|
|
|
|
IP_PUBLIC int ipppp_cmd_pppconfig(int argc, char **argv);
|
|
|
|
|
|
/*
|
|
****************************************************************************
|
|
* 6 LOCAL PROTOTYPES
|
|
****************************************************************************
|
|
*/
|
|
|
|
IP_PUBLIC Ip_err ipppp_configure(void);
|
|
|
|
|
|
/*
|
|
****************************************************************************
|
|
* 7 DATA
|
|
****************************************************************************
|
|
*/
|
|
|
|
/*
|
|
*===========================================================================
|
|
* SYSTEM VARIABLES
|
|
*===========================================================================
|
|
*/
|
|
|
|
/*
|
|
*===========================================================================
|
|
* ipppp_conf_sysvar
|
|
*===========================================================================
|
|
*/
|
|
IP_STATIC IP_CONST Ipcom_sysvar ipppp_conf_sysvar[] =
|
|
{
|
|
/* Device driver name. */
|
|
#ifdef IP_PORT_VXWORKS
|
|
#if defined(NUM_TTY) && (NUM_TTY>1)
|
|
{ "ipcom.if.ppp0.devname", "/tyCo/1" }, /* COM2 */
|
|
#endif
|
|
#else
|
|
{ "ipcom.if.ppp0.devname", "/dev/ttyS0" }, /* UNIX default */
|
|
#endif
|
|
|
|
/* Default baudrate. */
|
|
IP_SYSVAR("ipppp.baudrate", "9600", PPP_DEFAULT_BAUDRATE),
|
|
|
|
/* PPP runmode
|
|
* Supported modes: start, passive, exit, wincompat
|
|
*/
|
|
IP_SYSVAR("ipppp.runmode", "passive,wincompat", PPP_RUNMODE),
|
|
|
|
/* PPP flags
|
|
* Supported flags: defaultroute, proxyarp
|
|
*/
|
|
IP_SYSVAR("ipppp.flags", "proxyarp", PPP_FLAGS),
|
|
|
|
/* Authentication mode.
|
|
* Supported modes: auth, noauth, pap, refuse-pap, chap, refuse-chap
|
|
*/
|
|
IP_SYSVAR("ipppp.auth", "chap", PPP_AUTH_MODES),
|
|
|
|
/* LCP maximum receive unit */
|
|
IP_SYSVAR("ipppp.lcp.mru", "1500", PPP_LCP_MRU),
|
|
|
|
/* LCP maximum transmit unit */
|
|
IP_SYSVAR("ipppp.lcp.mtu", "1500", PPP_LCP_MTU),
|
|
|
|
/* Close LCP link when no ncp is opened */
|
|
IP_SYSVAR("ipppp.lcp.autoclose", "yes", PPP_LCP_CLOSE_IF_NO_NCP_OPENED),
|
|
|
|
/* Default LCP echo requests interval in seconds (0 to disable) */
|
|
IP_SYSVAR("ipppp.lcp.echo_interval", "60", PPP_LCP_ECHO_REQ_INTERVAL),
|
|
|
|
/* Max LCP EchoReq failures before link termination. */
|
|
IP_SYSVAR("ipppp.lcp.echo_failure", "5", PPP_LCP_ECHO_REQ_FAILURE),
|
|
|
|
/* Local IPv4 address. */
|
|
IP_SYSVAR("ipppp.ipcp.addr", "12.0.0.100", PPP_IPCP_IPV4_ADDRESS),
|
|
|
|
/* Peer IPv4 address */
|
|
IP_SYSVAR("ipppp.ipcp.dstaddr", "10.1.4.1", PPP_IPCP_PEER_IPV4_ADDRESS),
|
|
|
|
/* IPv4 local address. 0.0.0.0 = let peer suggest one. */
|
|
IP_SYSVAR("ipppp.ipcp.pool", "default", PPP_IPCP_PEER_IPV4_POOL_NAME),
|
|
|
|
/* IPv4 peer address pool (examples only!). */
|
|
#ifdef IP_PORT_VXWORKS
|
|
{ "ipppp.ipcp.pool." PPP_IPCP_PEER_IPV4_POOL_NAME, PPP_IPCP_PEER_IPV4_ADDRESS_POOL },
|
|
#else
|
|
{ "ipppp.ipcp.pool.default", "10.1.3.1-10.1.3.255" },
|
|
#endif
|
|
{ "ipcom.if.ppp0.ipppp.ipcp.dstaddr", "10.1.4.1" },
|
|
|
|
#ifndef IP_PORT_VXWORKS
|
|
{ "ipcom.users.olli.ipppp.ipcp.dstaddr", "10.1.5.1" },
|
|
#endif
|
|
|
|
/* PPP 'client' username and password. */
|
|
IP_SYSVAR("ipppp.username", "ppp", PPP_USERNAME),
|
|
IP_SYSVAR("ipppp.password", "kallekula", PPP_PASSWD),
|
|
|
|
#ifdef IPPPP_USE_RFC1877_SERVER
|
|
/* Primary and secondary DNS and NBNS(WINS) addresses */
|
|
IP_SYSVAR("ipppp.ipcp.primary_dns_address", "10.1.2.3", PPP_IPCP_PRIMARY_DNS_ADDRESS),
|
|
IP_SYSVAR("ipppp.ipcp.secondary_dns_address", "195.42.198.5", PPP_IPCP_SECONDARY_DNS_ADDRESS),
|
|
IP_SYSVAR("ipppp.ipcp.primary_nbns_address", "10.1.2.2", PPP_IPCP_PRIMARY_NBNS_ADDRESS),
|
|
IP_SYSVAR("ipppp.ipcp.secondary_nbns_address", "195.42.198.4", PPP_IPCP_SECONDARY_NBNS_ADDRESS),
|
|
#endif
|
|
|
|
#ifdef IPPPP_USE_PPPOE
|
|
/* Enable(1) /disable(0) PPPoE server */
|
|
IP_SYSVAR("ipppp.pppoe.server", "0", PPPOE_SERVER),
|
|
|
|
/* Access Concentrator Name (AC-Name) */
|
|
IP_SYSVAR("ipppp.pppoe.ac_name", "Interpeak PPPoE Server", PPPOE_AC_NAME),
|
|
|
|
/* Secret name (for PPPoE cookie). This macro is used in a MD5 checksum
|
|
* calculation to thwart DOS (denial-of-service) attacks. The definition of
|
|
* the string need not match any remote configuration! The value should be
|
|
* changed from its factory default.
|
|
*/
|
|
IP_SYSVAR("ipppp.pppoe.secret_name", "puttoanythinghere", PPPOE_SECRET_NAME),
|
|
|
|
/* Maximum total number of PPPoE sessions. */
|
|
IP_SYSVAR("ipppp.pppoe.max_sessions", "16", PPPOE_MAX_SESSIONS),
|
|
|
|
/* Maximum number of PPPoE sessions per Ethernet interface. */
|
|
IP_SYSVAR("ipppp.pppoe.max_eth_sessions", "8", PPPOE_MAX_ETH_SESSIONS),
|
|
|
|
#ifndef IP_PORT_VXWORKS
|
|
{ "ipcom.if.eth1.ipppp.pppoe.max_eth_sessions", "4" },
|
|
#endif
|
|
|
|
/* Service name we request/accept. Undefine to accept any service name. */
|
|
IP_SYSVAR("ipppp.pppoe.service_name", "myservice", PPPOE_SERVICE_NAME),
|
|
|
|
/* Example of how to lower the MRU/MTU for PPPoE using eth0:
|
|
{ "ipcom.if.eth0.ipppp.lcp.mru", "1024" },
|
|
{ "ipcom.if.eth0.ipppp.lcp.mtu", "512" },
|
|
*/
|
|
#endif /* IPPPP_USE_PPPOE */
|
|
|
|
#ifdef IPPPP_USE_PPPMP
|
|
/* Sysvars for PPP MULTILINK */
|
|
|
|
/* Enable(1) / disable(0) PPP multilink protocol */
|
|
IP_SYSVAR("ipppp.mp.enable", "0", PPPMP_ENABLE),
|
|
|
|
/* Set the maximum reconstructed received unit */
|
|
IP_SYSVAR("ipppp.mp.mrru", "1500", PPPMP_MRRU),
|
|
|
|
/* Enable(1) / Disable(0) PPP MP Short Sequence Number usage*/
|
|
IP_SYSVAR("ipppp.mp.ssn", "0", PPPMP_SSN),
|
|
|
|
/* Disable(1) / Enable (0) PPP MP PDU Fragmentation */
|
|
IP_SYSVAR("ipppp.mp.frag_disable", "0", PPPMP_FRAG_DISABLE),
|
|
|
|
#ifdef IPPPP_USE_PPPOE
|
|
IP_SYSVAR("ipppp.pppoe.mp_links", "1", PPPMP_PPPOE_LINKS),
|
|
#endif /* IPPPP_USE_PPPOE */
|
|
#endif /* IPPPP_USE_PPPMP */
|
|
|
|
#ifdef IPPPP_USE_VJCOMP
|
|
IP_SYSVAR("ipppp.vjc.enable", "0", PPPVJC_ENABLE),
|
|
#endif /* IPPPP_USE_VJCOMP */
|
|
|
|
#ifdef IPPPP_USE_PPPL2TP
|
|
IP_SYSVAR("ipppp.l2tp.lnsAddrDefault", "0.0.0.0", PPP_L2TP_LNS_ADDRESS_DEFAULT),
|
|
#ifdef IPPPP_USE_PPPL2TP_LNS
|
|
{ "ipppp.l2tp.server", "0"},
|
|
#endif
|
|
#endif
|
|
|
|
{ IP_NULL, IP_NULL }
|
|
};
|
|
|
|
#ifdef IP_PORT_VXWORKS
|
|
/* Interface specific list configurations */
|
|
IP_CONST Ipcom_sysvar_ext ipppp_conf_sysvar_ext[] =
|
|
{
|
|
#ifdef INCLUDE_IPPPP_INTERFACE_CONFIG
|
|
/*
|
|
* Interface initial baudrate. This parameter is configurable on a
|
|
* per-interface basis in the form of "<ifparam>=<value>", each separated
|
|
* from the other by a semicolon. E.g, "ppp0=38400".
|
|
*/
|
|
{"ipcom.if", "ipppp.baudrate", PPP_IF_DEFAULT_BAUDRATE_LIST},
|
|
|
|
/*
|
|
* Interface runmode. Specifies one or more runmode options on an
|
|
* interface. Possible runmode options are "start", "passive" and "exit".
|
|
* This parameter is configurable on a per-interface basis in the form
|
|
* of "<ifparam>=<value>", each separated from the other by a semicolon.
|
|
* E.g, "ppp0=start,passive".
|
|
*/
|
|
{"ipcom.if", "ipppp.runmode", PPP_IF_RUNMODE_LIST},
|
|
|
|
/*
|
|
* Interface PPP flags. Specifies one or more flag behavioural options
|
|
* on an interface. Possible flags options are "defaultroute" and
|
|
* "proxyarp". This parameter is configurable on a per-interface basis
|
|
* in the form of "<ifparam>=<value>", each separated from the other by
|
|
* a semicolon. E.g, "ppp0=proxyarp".
|
|
*/
|
|
{"ipcom.if", "ipppp.flags", PPP_IF_FLAGS_LIST},
|
|
|
|
/*
|
|
* Configures the required authentication modes. There are currently
|
|
* six authentication options defined - "auth", "noauth", "pap",
|
|
* "refuse-pap", "chap", and "refuse-chap". This parameter is configurable
|
|
* on a per-interface basis in the form of "<ifparam>=<value>", each
|
|
* separated from the other by a semicolon. E.g. "ppp0=chap;ppp1=pap".
|
|
*/
|
|
{ "ipcom.if", "ipppp.auth", PPP_IF_AUTH_MODES_LIST},
|
|
|
|
/*
|
|
* Configures the username for this interface. This parameter is configurable
|
|
* on a per-interface basis in the form of "<ifparam>=<value>", each
|
|
* separated from the other by a semicolon. E.g. "ppp0=PPP1;ppp1=PPP2".
|
|
*/
|
|
{ "ipcom.if", "ipppp.username", PPP_IF_USERNAME},
|
|
|
|
/*
|
|
* Configures the password for this interface. This parameter is configurable
|
|
* on a per-interface basis in the form of "<ifparam>=<value>", each
|
|
* separated from the other by a semicolon. E.g. "ppp0=PAS1;ppp1=PAS2".
|
|
*/
|
|
{ "ipcom.if", "ipppp.password", PPP_IF_PASSWD},
|
|
|
|
/*
|
|
* Interface LCP maximum receive unit. This parameter is configurable
|
|
* on a per-interface basis in the form of "<ifparam>=<value>", each
|
|
* separated from the other by a semicolon. E.g, "ppp0=1500".
|
|
*/
|
|
{"ipcom.if", "ipppp.lcp.mru", PPP_IF_LCP_MRU_LIST},
|
|
|
|
/*
|
|
* Interface LCP maximum transmit unit. This parameter is configurable
|
|
* on a per-interface basis in the form of "<ifparam>=<value>", each
|
|
* separated from the other by a semicolon. E.g, "ppp0=1500".
|
|
*/
|
|
{"ipcom.if", "ipppp.lcp.mtu", PPP_IF_LCP_MTU_LIST},
|
|
|
|
/*
|
|
* LCP echo request output interval in seconds. 0 to disable. This
|
|
* parameter is configurable on a per-interface basis in the form of
|
|
* "<ifparam>=<value>", each separated from the other by a semicolon.
|
|
* E.g, "ppp0=60".
|
|
*/
|
|
{"ipcom.if", "ipppp.lcp.echo_interval", PPP_IF_LCP_ECHO_REQ_INTERVAL_LIST},
|
|
|
|
/*
|
|
* Max echo request failures before link termination. This parameter can
|
|
* be configured on a per-interface basis in the form of
|
|
* "<ifparam>=<value>", each separated from the other by a semicolon.
|
|
* E.g, "ppp0=5"
|
|
*/
|
|
{"ipcom.if", "ipppp.lcp.echo_failure", PPP_IF_LCP_ECHO_REQ_FAILURE_LIST},
|
|
|
|
/*
|
|
* Local IPv4 address list
|
|
* Specifies the desired local IPv4 address. Setting local IPv4 address
|
|
* to 0 means asking the peer to suggest our IPv4 address. This parameter
|
|
* is configurable on a per-interface basis in the form of
|
|
* "<ifparam>=<value>", each separated from the other by a semicolon.
|
|
* E.g, "ppp0=12.0.0.100".
|
|
*/
|
|
{"ipcom.if", "ipppp.ipcp.addr", PPP_IF_IPCP_IPV4_ADDRESS_LIST},
|
|
|
|
/*
|
|
* Peer IPv4 address list
|
|
* Suggest peer IPv4 address if asked for. Note that the peer IPv4
|
|
* address will only get suggested to the peer if it ask for it by
|
|
* requesting IP address 0. This parameter is configurable on a
|
|
* per-interface basis in the form of "<ifparam>=<value>", each separated
|
|
* from the other by a semicolon. E.g, "ppp0=10.1.4.1".
|
|
*/
|
|
{ "ipcom.if", "ipppp.ipcp.dstaddr", PPP_IF_IPCP_PEER_IPV4_ADDRESS_LIST},
|
|
|
|
/*
|
|
* Interface IPv4 peer address pool list
|
|
* Configure a IPv4 address pool used for the interface to supply peers
|
|
* with IPv4 addresses when running as a PPP or PPPoE server. This
|
|
* parameter is configurable on a per-interface basis in the form of
|
|
* "<ifparam>=<value>", each separated from the other by a semicolon.
|
|
* E.g., "ppp0=10.1.3.1-10.1.3.255".
|
|
*/
|
|
{ "ipcom.if", "ipppp.ipcp.pool",
|
|
PPP_IF_IPCP_PEER_IPV4_ADDRESS_POOL_LIST},
|
|
|
|
/*
|
|
* Configures the PPP client IPv4 primary DNS address. The configured
|
|
* IPv4 address will be given to the peer (the client) if the peer
|
|
* requests a primary DNS address. This parameter is configurable on
|
|
* a per-interface basis in the form of "<ifparam>=<value>", each
|
|
* separated from the other by a semicolon.
|
|
* E.g. "ppp0=10.1.2.3;ppp1=10.2.2.3".
|
|
*/
|
|
{ "ipcom.if", "ipppp.ipcp.primary_dns_address",
|
|
PPP_IF_IPCP_PRIMARY_DNS_ADDRESS_LIST },
|
|
|
|
/*
|
|
* Configures the PPP client IPv4 secondary DNS address. The configured
|
|
* IPv4 address will be given to the peer (the client) if the peer
|
|
* requests a secondary DNS address. This parameter is configurable on
|
|
* a per-interface basis in the form of "<ifparam>=<value>", each
|
|
* separated from the other by a semicolon.
|
|
* E.g. "ppp0=195.42.198.5;ppp1=195.43.198.5".
|
|
*/
|
|
{ "ipcom.if", "ipppp.ipcp.secondary_dns_address",
|
|
PPP_IF_IPCP_SECONDARY_DNS_ADDRESS_LIST },
|
|
|
|
#endif /* INCLUDE_IPPPP_INTERFACE_CONFIG */
|
|
|
|
#ifdef INCLUDE_IPPPP_USERS_CONFIG
|
|
/*
|
|
* LCP echo request output interval in seconds. 0 to disable. This
|
|
* parameter is configurable on a per-user basis in the form of
|
|
* "<username>=<value>", each separated from the other by a semicolon.
|
|
* E.g, "user1=60;user2=60".
|
|
*/
|
|
{"ipcom.users", "ipppp.lcp.echo_interval",
|
|
PPP_USERS_LCP_ECHO_REQ_INTERVAL_LIST},
|
|
|
|
/*
|
|
* user local IPv4 address list
|
|
* Specifies the desired local IPv4 address. Setting local IPv4 address
|
|
* to 0 means asking the peer to suggest our IPv4 address. This parameter
|
|
* is configurable on a per-user basis in the form of
|
|
* "<username>=<value>". Each pair of "<username>=<value>" is semicolon
|
|
* separated. E.g, "user1=12.0.0.100;user2=12.1.0.100".
|
|
*/
|
|
{"ipcom.users", "ipppp.ipcp.addr", PPP_USERS_IPCP_IPV4_ADDRESS_LIST},
|
|
|
|
/*
|
|
* Users Peer IPv4 address list
|
|
* Suggest peer IPv4 address if asked for. Note that the peer IPv4
|
|
* address will only get suggested to the peer if it ask for it by
|
|
* requesting IP address 0. This parameter is configurable on a
|
|
* per-user basis in the form of "<username>=<value>". Each pair
|
|
* of "<username>=<value>" is semicolon separated.
|
|
* E.g, "user1=10.1.4.1;user2=10.2.4.1"
|
|
*/
|
|
{ "ipcom.users", "ipppp.ipcp.dstaddr",
|
|
PPP_USERS_IPCP_PEER_IPV4_ADDRESS_LIST},
|
|
|
|
/*
|
|
* Users IPv4 peer address pool list
|
|
* Configure a IPv4 address pool used for a user to supply peers with
|
|
* IPv4 addresses when running as a PPP or PPPoE server. This parameter
|
|
* is configurable on a per-user basis in the form of
|
|
* "<username>=<value>". Each pair of "<username>=<value>" is semicolon
|
|
* separated. E.g., "user1=10.1.3.1-10.1.3.255;user2=10.2.3.1-10.2.3.255".
|
|
*/
|
|
{ "ipcom.users", "ipppp.ipcp.pool",
|
|
PPP_USERS_IPCP_PEER_IPV4_ADDRESS_POOL_LIST},
|
|
|
|
/*
|
|
* Configures the PPP client IPv4 primary DNS address. The configured
|
|
* IPv4 address will be given to the peer (the client) if the peer
|
|
* requests a primary DNS address. This parameter is configurable on
|
|
* a per-user basis in the form of "<ifparam>=<value>", each separated
|
|
* from the other by a semicolon.
|
|
* E.g. "user1=10.1.2.3;user2=10.2.2.3"
|
|
*/
|
|
{ "ipcom.users", "ipppp.ipcp.primary_dns_address",
|
|
PPP_USERS_IPCP_PRIMARY_DNS_ADDRESS_LIST },
|
|
|
|
/*
|
|
* Configures the PPP client IPv4 secondary DNS address. The configured
|
|
* IPv4 address will be given to the peer (the client) if the peer
|
|
* requests a secondary DNS address. This parameter is configurable on
|
|
* a per-user basis in the form of "<ifparam>=<value>", each separated
|
|
* from the other by a semicolon.
|
|
* E.g. "user1=195.42.198.5;user2=195.43.198.5".
|
|
*/
|
|
{ "ipcom.users", "ipppp.ipcp.secondary_dns_address",
|
|
PPP_USERS_IPCP_SECONDARY_DNS_ADDRESS_LIST },
|
|
|
|
#endif /* INCLUDE_IPPPP_USERS_CONFIG */
|
|
|
|
#ifdef INCLUDE_IPPPPOE
|
|
/*
|
|
* Maximum number of PPPoE sessions per Ethernet interface. Note that the
|
|
* interface name used is the Ethernet interface name and not the pppoe
|
|
* interface name. This parameter is configurable on a per-interface basis
|
|
* in the form of "<ifparam>=<value>", each separated from the other by
|
|
* a semicolon. E.g. "eth0=8;eth1=8".
|
|
*/
|
|
{ "ipcom.if", "ipppp.pppoe.max_eth_sessions",
|
|
PPPOE_IF_MAX_ETH_SESSIONS_LIST},
|
|
|
|
/*
|
|
* Service name to accept. Do not set the service name to accept any
|
|
* service name. This parameter is configurable on a per-interface basis
|
|
* in the form of "<ifparam>=<value>", each separated from the other by
|
|
* a semicolon. E.g. "ppp0=myservicename1;ppp1=myservicename2".
|
|
*/
|
|
{ "ipcom.if", "ipppp.pppoe.service_name", PPPOE_IF_SERVICE_NAME_LIST},
|
|
#endif /* INCLUDE_IPPPPOE */
|
|
|
|
{ IP_NULL, IP_NULL, IP_NULL }
|
|
};
|
|
#endif /* IP_PORT_VXWORKS */
|
|
|
|
/*
|
|
****************************************************************************
|
|
* 8 STATIC FUNCTIONS
|
|
****************************************************************************
|
|
*/
|
|
|
|
/*
|
|
****************************************************************************
|
|
* 9 GLOBAL FUNCTIONS
|
|
****************************************************************************
|
|
*/
|
|
|
|
/*
|
|
****************************************************************************
|
|
* 10 PUBLIC FUNCTIONS
|
|
****************************************************************************
|
|
*/
|
|
|
|
/*
|
|
*===========================================================================
|
|
* ipppp_configure
|
|
*===========================================================================
|
|
* Description:
|
|
* Parameters:
|
|
* Returns:
|
|
*
|
|
*/
|
|
IP_PUBLIC Ip_err
|
|
ipppp_configure(void)
|
|
{
|
|
/* Set IPPPP system variables. */
|
|
(void)ipcom_sysvar_setv(ipppp_conf_sysvar, 0);
|
|
|
|
#ifndef IP_PORT_OSE5
|
|
|
|
#ifdef IP_PORT_VXWORKS
|
|
/* now configure the interface-specific sysvars */
|
|
(void)ipcom_sysvar_ext_setv(ipppp_conf_sysvar_ext, 0);
|
|
#endif
|
|
|
|
(void)ipcom_shell_add_cmd("pppconfig", "pppconfig <ifname> [options]", "ppp config",
|
|
ipppp_cmd_pppconfig,
|
|
IPCOM_SHELL_PRIO_SAME, IPCOM_PROC_STACK_SMALL);
|
|
#endif
|
|
|
|
return IPCOM_SUCCESS;
|
|
}
|
|
|
|
|
|
/*
|
|
****************************************************************************
|
|
* END OF FILE
|
|
****************************************************************************
|
|
*/
|