/* 01ipfreescale.cdf - IPFREESCALE configuration file */

/*
 * Copyright (c) 2006-2007 Wind River Systems, Inc.
 *
 * The right to copy, distribute or otherwise make use of this software
 * may be licensed only pursuant to the terms of an applicable Wind River
 * license agreement. No license to Wind River intellectual property rights
 * is granted herein. All rights not licensed by Wind River are reserved
 * by Wind River.
 */

/*
modification history
--------------------
12oct16,ghl  To change freescale test commands to visible component, and 
             IPFREESCALE don't depends on SHELL.
01a,02jul07,mcarlste Added file contents
01b,09mar11,dhessing Added SEC4 engine support
*/

#ifdef _WRS_CONFIG_COMPONENT_IPFREESCALE

#ifdef _WRS_CONFIG_BSP_SUPPORTS_IPFREESCALE_SEC4
Component INCLUDE_IPFREESCALE
    {
    NAME            Hardware crypto offload for Freescale SEC4 engines.
    SYNOPSIS        Enables the Freescale SEC4.X security engine
    CONFIGLETTES    ipfreescale_config.c
    MODULES         ipfreescale_sec.o sec4_init.o
    CFG_PARAMS      SEC4_IRQ_COALESCING_COUNT SEC4_IRQ_COALESCING_TIME \
                    SEC4_JOBQUEUE_INPUT_RING_SIZE SEC4_JOBQUEUE_OUTPUT_RING_SIZE
    REQUIRES        INCLUDE_IPHWCRYPTO
    _CHILDREN       FOLDER_CRYPTO
    } 
#else
Component INCLUDE_IPFREESCALE
    {
    NAME            Hardware crypto offload for Freescale SEC2 engines.
    SYNOPSIS        Enables the Freescale SEC2.X security engine
    CONFIGLETTES    ipfreescale_config.c
    MODULES         ipfreescale_sec.o sec2_init.o
    CFG_PARAMS      SEC2_CORE_VERSION SEC2_DEVICE_FAMILY    
    REQUIRES        INCLUDE_IPHWCRYPTO
    _CHILDREN       FOLDER_CRYPTO
    }
#endif

/* This is a hidden component */
Component INCLUDE_IPFREESCALE_CMD
    {
    NAME            FREESCALE Test Commands
    SYNOPSIS        freescale test command
    MODULES         ipfreescale_cmd_freescale.o
    _CHILDREN       FOLDER_CRYPTO
    REQUIRES        INCLUDE_IPFREESCALE INCLUDE_IPCOM_SHELL_CMD
    }

/******************** Configuration Parameters *****************************/

#ifdef _WRS_CONFIG_BSP_SUPPORTS_IPFREESCALE_SEC4
Parameter SEC4_IRQ_COALESCING_COUNT {
    NAME        SEC4 job queue interrupt coalescing count threshold
    SYNOPSIS    The number of completed SEC4 jobs before raising an interrupt.\
                Valid values are 1 - 255. If SEC4_JQ_IRQ_COAL_TIME expire,\
                then an interrupt will still be raised even though the count\
                threshold has not been reached.
    TYPE        uint
    DEFAULT     1
}

Parameter SEC4_IRQ_COALESCING_TIME {
    NAME        SEC4 job queue interrupt coalescing timer threshold
    SYNOPSIS    The maximum time after completing a SEC4 job before raising \
                an interrupt. Each unit represent 64 SEC4 interface clocks. \
                Valid values are 0 - 65535.
    TYPE        uint
    DEFAULT     0
}

Parameter SEC4_JOBQUEUE_INPUT_RING_SIZE {
    NAME        SEC4 job queue input ring size
    SYNOPSIS    Number of entries in the SEC4 job queue input ring, \
                used for submitting jobs to the SEC4. \
                Valid values are 1 - 1023.
    TYPE        uint
    DEFAULT     256
}

Parameter SEC4_JOBQUEUE_OUTPUT_RING_SIZE {
    NAME        SEC4 job queue output ring size
    SYNOPSIS    Number of entries in the SEC4 job queue output ring, \
                holding completed jobs from the SEC4. \
                Valid values are 1 - 1023.
    TYPE        uint
    DEFAULT     256
}
#else
/* INCLUDE_IPFREESCALE configuration parameters */
Parameter SEC2_CORE_VERSION {
    NAME        SEC2 Core Version
    SYNOPSIS    The security engine core version: 2.0, 2.1, 2.2, 2.4, 3.0 or 3.3.
    TYPE        char *
    DEFAULT     "2.0"
}

Parameter SEC2_DEVICE_FAMILY {
    NAME        SEC2 Device Family
    SYNOPSIS    The PowerQUICC device family: 2 for PowerQUICC II Pro and 3 for PowerQUICC III.
    TYPE        char *
    DEFAULT     "3"
}
#endif

#endif