/* 00comp_ipnet_ppp.cdf - IPNet PPP configuration file */

/*
 * Copyright (c) 2006-2007 Wind River Systems, Inc.
 *
 * The right to copy, distribute or otherwise make use of this software
 * may be licensed only pursuant to the terms of an applicable Wind River
 * license agreement. No license to Wind River intellectual property rights
 * is granted herein. All rights not licensed by Wind River are reserved
 * by Wind River.
 */

/*
modification history
--------------------
01j,23apr08,rme  General misspelled words
01i,19sep07,rme  Added missing backslash (line: 194)
01h,22jan07,kch  Added configuration parameters for PPP username and password
                 (WIND00085576).
01g,10jan07,kch  Updated default value for PPP_IPCP_PEER_IPV4_ADDRESS and
                 PPP_IPCP_PEER_IPV4_ADDRESS_POOL.
01f,04jan07,kch  Updated default value for PPP_DEFAULT_BAUDRATE,
                 PPP_AUTH_MODES, PPPOE_SERVER and PPPOE_SERVICE_NAME. Removed
                 PPPOE_IF_MAX_SESSIONS_LIST configuration parameter.
01e,12dec06,kch  Added PPP_INSTALL_CALLBACK_HOOK configuration parameter
                 to INCLUDE_IPPPP.
01d,01dec06,kch  Added PPP_ACTION_CALLBACK_HOOK parameter and ipppp_example.c
                 configlette  to INCLUDE_IPPPP.
01c,27nov06,kch  Only define ipppp configlette once in INCLUDE_IPPPP.
01b,23sep06,kch  Fixed IPCOM shell commands description.
01a,17sep06,kch  created.
*/

Component INCLUDE_IPPPP {
    NAME            PPP
    SYNOPSIS        PPP
    MODULES         ipppp.o
    REQUIRES        INCLUDE_IPNET_USE_PPP
    CONFIGLETTES    ipppp_config.c ipppp_example.c
    CFG_PARAMS      PPP_DEFAULT_BAUDRATE PPP_RUNMODE PPP_FLAGS PPP_AUTH_MODES \
                    PPP_LCP_MRU PPP_LCP_MTU PPP_LCP_ECHO_REQ_INTERVAL \
                    PPP_LCP_ECHO_REQ_FAILURE PPP_IPCP_IPV4_ADDRESS \
                    PPP_IPCP_PEER_IPV4_ADDRESS PPP_IPCP_PEER_IPV4_POOL_NAME \
                    PPP_IPCP_PEER_IPV4_ADDRESS_POOL \
                    PPP_USERNAME PPP_PASSWD \
                    PPP_IPCP_PRIMARY_DNS_ADDRESS \
                    PPP_IPCP_SECONDARY_DNS_ADDRESS \
                    PPP_IPCP_PRIMARY_NBNS_ADDRESS \
                    PPP_IPCP_SECONDARY_NBNS_ADDRESS \
                    PPP_L2TP_LNS_ADDRESS_DEFAULT \
                    PPP_INSTALL_CALLBACK_HOOK PPP_ACTION_CALLBACK_HOOK \
                    PPP_LCP_CLOSE_IF_NO_NCP_OPENED
}

Selection SELECT_IPPPP_OPTIONAL_CONFIG {
    NAME            Optional IPPP configurations
    SYNOPSIS        Optional IPPP configurations
    COUNT           0-
    CHILDREN        INCLUDE_IPPPP_INTERFACE_CONFIG \
                    INCLUDE_IPPPP_USERS_CONFIG
}

Component INCLUDE_IPPPP_INTERFACE_CONFIG {
    NAME            Per-interface configurations
    SYNOPSIS        Per-interface configurations
    REQUIRES        INCLUDE_IPPPP
    CFG_PARAMS      PPP_IF_DEFAULT_BAUDRATE_LIST PPP_IF_RUNMODE_LIST \
                    PPP_IF_FLAGS_LIST PPP_IF_AUTH_MODES_LIST \
                    PPP_IF_USERNAME PPP_IF_PASSWD \
                    PPP_IF_LCP_MRU_LIST PPP_IF_LCP_MTU_LIST \
                    PPP_IF_LCP_ECHO_REQ_INTERVAL_LIST \
                    PPP_IF_LCP_ECHO_REQ_FAILURE_LIST \
                    PPP_IF_IPCP_IPV4_ADDRESS_LIST \
                    PPP_IF_IPCP_PEER_IPV4_ADDRESS_LIST \
                    PPP_IF_IPCP_PEER_IPV4_ADDRESS_POOL_LIST \
                    PPP_IF_IPCP_PRIMARY_DNS_ADDRESS_LIST \
                    PPP_IF_IPCP_SECONDARY_DNS_ADDRESS_LIST
}

Component INCLUDE_IPPPP_USERS_CONFIG {
    NAME            Per-user configurations
    SYNOPSIS        Per-user configurations
    REQUIRES        INCLUDE_IPPPP
    CFG_PARAMS      PPP_USERS_LCP_ECHO_REQ_INTERVAL_LIST \
                    PPP_USERS_IPCP_IPV4_ADDRESS_LIST \
                    PPP_USERS_IPCP_PEER_IPV4_ADDRESS_LIST \
                    PPP_USERS_IPCP_PEER_IPV4_ADDRESS_POOL_LIST \
                    PPP_USERS_IPCP_PRIMARY_DNS_ADDRESS_LIST \
                    PPP_USERS_IPCP_SECONDARY_DNS_ADDRESS_LIST
}

Component INCLUDE_IPPPPOE {
    NAME            PPPoE
    SYNOPSIS        PPPoE
    REQUIRES        INCLUDE_IPNET_USE_PPP INCLUDE_IPCOM_USE_ETHERNET \
                    INCLUDE_IPPPP
    MODULES         ipppp_pppoe.o
    LINK_SYMS       ipppp_pppoe_input
    CFG_PARAMS      PPPOE_SERVER PPPOE_SECRET_NAME PPPOE_MAX_SESSIONS \
                    PPPOE_MAX_ETH_SESSIONS PPPOE_AC_NAME PPPOE_SERVICE_NAME \
                    PPPOE_IF_MAX_ETH_SESSIONS_LIST \
                    PPPOE_IF_SERVICE_NAME_LIST
}

Component INCLUDE_IPPPP_CMD {
    NAME        PPP IPCOM commands
    SYNOPSIS    pppconfig IPCOM commands
    MODULES     ipppp_cmd_pppconfig.o
    REQUIRES    INCLUDE_IPCOM_SHELL_CMD INCLUDE_IPPPP
}

Component INCLUDE_IPPPPMP {
    NAME            PPP Multilink
    SYNOPSIS        PPP Multilink
    REQUIRES        INCLUDE_IPPPP
    MODULES         ipppp_pppmp.o
    LINK_SYMS       ipppp_pppmp_input
    CFG_PARAMS      PPPMP_ENABLE PPPMP_MRRU PPPMP_SSN PPPMP_FRAG_DISABLE PPPMP_PPPOE_LINKS
}

Component INCLUDE_IPPPP_VJCOMP {
    NAME            PPP Van Jacobson Compression
    SYNOPSIS        PPP TCP/IP header compression from RFC 1144
    REQUIRES        INCLUDE_IPPPP
    MODULES         ipppp_vjcomp.o
    LINK_SYMS       ipppp_vjcomp_init
    CFG_PARAMS      PPPVJC_ENABLE
}

/******************** Configuration Parameters *****************************/

/* INCLUDE_IPPPP configuration parameters */
Parameter PPP_DEFAULT_BAUDRATE {
    NAME        Initial baudrate
    SYNOPSIS    PPP RS232 serial driver baudrate.
    TYPE        char *
    DEFAULT     "9600"
}

Parameter PPP_RUNMODE {
    NAME        Runmode
    SYNOPSIS    Specifies one or more runmode options on an interface. \
                Possible runmode options are "start", "passive" , "exit" \
                "wincompat".
    TYPE        char *
    DEFAULT     "start,passive,wincompat"
}

Parameter PPP_FLAGS {
    NAME        PPP flags
    SYNOPSIS    Specifies one or more flag behavioral options on an \
                interface. Possible flags options are "defaultroute" \
                and "proxyarp".
    TYPE        char *
    DEFAULT     "proxyarp"
}

Parameter PPP_AUTH_MODES {
    NAME        Authentication mode
    SYNOPSIS    Configures the required authentication modes. Currently, \
                there are six authentication modes defined - "auth", \
                "noauth", "pap", "refuse-pap", "chap", and "refuse-chap"
    TYPE        char *
    DEFAULT     "noauth"
}

Parameter PPP_LCP_MRU {
    NAME        LCP maximum receive unit
    SYNOPSIS    Specifies LCP Maximum receive unit.
    TYPE        char *
    DEFAULT     "1500"
}

Parameter PPP_LCP_MTU {
    NAME        LCP maximum transmit unit
    SYNOPSIS    Specifies LCP maximum transmit unit.
    TYPE        char *
    DEFAULT     "1500"
}

Parameter PPP_LCP_ECHO_REQ_INTERVAL {
    NAME        LCP echo requests interval
    SYNOPSIS    LCP EchoReq output interval in seconds. 0 to disable.
    TYPE        char *
    DEFAULT     "60"
}

Parameter PPP_LCP_ECHO_REQ_FAILURE {
    NAME        Echo failure
    SYNOPSIS    Max echo request failures before link termination.
    TYPE        char *
    DEFAULT     "5"
}

Parameter PPP_IPCP_IPV4_ADDRESS {
    NAME        Local IPv4 address
    SYNOPSIS    Specifies the desired local IPv4 address. Setting local IPv4 \
                address to 0.0.0.0 means asking the peer to suggest our IPv4 \
                address.
    TYPE        char *
    DEFAULT     "0.0.0.0"
}

Parameter PPP_IPCP_PEER_IPV4_ADDRESS {
    NAME        Peer IPv4 address
    SYNOPSIS    Suggest peer IPv4 address if asked for. Note that the peer \
                IPv4 address will only get suggested to the peer if it ask \
                for it by requesting IP address 0.0.0.0.
    TYPE        char *
    DEFAULT     "10.1.4.1"
}

Parameter PPP_IPCP_PEER_IPV4_POOL_NAME {
    NAME        Peer IPv4 address pool name
    SYNOPSIS    Defines the name of the address pool used to supply peers \
                with IPv4 addresses when running as a PPP or PPPoE server. \
                The configuration consists of two steps. First a pool must be \
                defined with a name with PPP_IPCP_PEER_IPV4_POOL_NAME. The \
                start and end IPv4 addresses pool are then defined with \
                PPP_IPCP_PEER_IPV4_ADDRESS_POOL. E.g. "default".
    TYPE        char *
    DEFAULT     "default"
}

Parameter PPP_IPCP_PEER_IPV4_ADDRESS_POOL {
    NAME        Peer IPv4 address pool
    SYNOPSIS    Configures a IPv4 address pool associated with the pool name \
                defined by PPP_IPCP_PEER_IPV4_POOL_NAME. This address pool \
                is used to supply peers with IPv4 addresses when running as \
                a PPP or PPPoE server. E.g., "10.1.3.1-10.1.3.255".
    TYPE        char *
    DEFAULT     "10.1.3.1-10.1.3.255"
}

Parameter PPP_USERNAME {
    NAME        PPP username
    SYNOPSIS    PPP username.
    TYPE        char *
    DEFAULT     "ppp"
}

Parameter PPP_PASSWD {
    NAME        PPP password
    SYNOPSIS    PPP password
    TYPE        char *
    DEFAULT     "kallekula"
}

Parameter PPP_IPCP_PRIMARY_DNS_ADDRESS {
    NAME        Primary DNS Address
    SYNOPSIS    Configures the PPP client IPv4 primary DNS address. The \
                configured IPv4 address will be given to the peer (i.e. the \
                client) if the peer requests a primary DNS address. \
                E.g. "10.1.2.3".
    TYPE        char *
    DEFAULT     ""
}

Parameter PPP_IPCP_SECONDARY_DNS_ADDRESS {
    NAME        Secondary DNS Address
    SYNOPSIS    Configures the PPP client IPv4 secondary DNS address. The \
                configured IPv4 address will be given to the peer (the \
                client) if the peer requests a secondary DNS address. \
                E.g. "195.42.198.5".
    TYPE        char *
    DEFAULT     ""
}

/* INCLUDE_IPPPP_INTERFACE_CONFIG configuration parameters */
Parameter PPP_IPCP_PRIMARY_NBNS_ADDRESS {
    NAME        Primary NBNS Address
    SYNOPSIS    Configures PPP client IPv4 primary NBNS address. The \
                configured IPv4 address will be given to the peer (i.e. the \
                client) if the peer requests a primary NBNS (WINS) address. \
                E.g., "10.1.2.2".
    TYPE        char *
    DEFAULT     ""
}

Parameter PPP_IPCP_SECONDARY_NBNS_ADDRESS {
    NAME        Secondary NBNS Address
    SYNOPSIS    Configures the PPP client IPv4 secondary DNS address. The \
                configured IPv4 address will be given to the peer (the \
                client) if the peer requests a secondary DNS address. \
                E.g. "195.42.198.4".
    TYPE        char *
    DEFAULT     ""
}

Parameter PPP_L2TP_LNS_ADDRESS_DEFAULT {
    NAME        Default Address for L2TP Network Server
    SYNOPSIS    Configures a default address for PPP over L2TPv2 for a \
                Network Server.  This address will be used by PPP when \
                establishing a PPP over L2TPv2 connection, when no another \
                address has been assigned.  \
                E.g. "195.42.198.4".
    TYPE        char *
    DEFAULT     ""
}

Parameter PPP_LCP_CLOSE_IF_NO_NCP_OPENED {
    NAME        Close LCP link if no ncp is opened
    SYNOPSIS    Close LCP link if there is no more ncp is in opened state.
    TYPE        char *
    DEFAULT     "yes"
}

Parameter PPP_INSTALL_CALLBACK_HOOK {
    NAME        Install ppp callback routine
    SYNOPSIS    Determines if the user-defined PPP action callback routine \
                as specified by the macro PPP_ACTION_CALLBACK_HOOK should \
                be installed. If FALSE, the PP_ACTION_CALLBACK_HOOK \
                configuration is not applicable.
    TYPE        BOOL
    DEFAULT     FALSE
}

Parameter PPP_ACTION_CALLBACK_HOOK {
    NAME        PPP action callback routine
    SYNOPSIS    User-defined PPP action callback routine. In order for \
                PPP to function, this callback function used by PPP must \
                be implemented to handle various PPP actions like initialization, \
                startup, peer IPv4 address requests, Peer authentication \
                login etc. If not specified, the internal PPP action \
                callback routine will be used. The \
                PPP_INSTALL_CALLBACK_HOOK must also be set to TRUE in \
                order to install this callback hook.
    TYPE        FUNCPTR
    DEFAULT     NULL
}

Parameter PPP_IF_DEFAULT_BAUDRATE_LIST {
    NAME        Initial baudrate
    SYNOPSIS    PPP RS232 serial driver baudrate. This parameter is \
                configurable on a per-interface basis in the form of \
                "<ifparam>=<value>", each separated from the other by a \
                semicolon. E.g, "ppp0=38400;ppp1=38400".
    TYPE        char *
    DEFAULT     ""
}

Parameter PPP_IF_RUNMODE_LIST {
    NAME        Interface runmode
    SYNOPSIS    Specifies one or more runmode options on an interface. \
                Possible runmode options are "start", "passive" and "exit". \
                This parameter is configurable on a per-interface basis in \
                the form of "<ifparam>=<value>", each separated from the \
                other by a semicolon. E.g, "ppp0=start,passive".
    TYPE        char *
    DEFAULT     ""
}

Parameter PPP_IF_FLAGS_LIST {
    NAME        PPP flags
    SYNOPSIS    Specifies one or more flag behavioural options on an \
                interface. Possible flags options are "defaultroute" \
                and "proxyarp". This parameter is configurable on a \
                per-interface basis in the form of "<ifparam>=<value>", \
                each separated from the other by a semicolon. E.g, \
                "ppp0=proxyarp;ppp1=proxyarp".
    TYPE        char *
    DEFAULT     ""
}

Parameter PPP_IF_AUTH_MODES_LIST {
    NAME        Authentication mode
    SYNOPSIS    Configures the required authentication modes. There are \
                six authentication modes - "auth", \
                "noauth", "pap", "refuse-pap", "chap", and "refuse-chap". \
                This parameter is configurable on a per-interface basis in \
                the form of "<ifparam>=<value>", each separated from the \
                other by a semicolon. E.g. "ppp0=chap;ppp1=pap".
    TYPE        char *
    DEFAULT     ""
}

Parameter PPP_IF_USERNAME {
    NAME        PPP username per interface
    SYNOPSIS    Configures the username for this interface. This parameter \
                is configurable on a per-interface basis in the form of \
                "<ifparam>=<value>", each separated from the other by a \
                semicolon. E.g. "ppp0=PPP1;ppp1=PPP2".
    TYPE        char *
    DEFAULT     ""
}

Parameter PPP_IF_PASSWD {
    NAME        PPP password per interface
    SYNOPSIS    Configures the password for this interface. This parameter \
                is configurable on a per-interface basis in the form of \
                "<ifparam>=<value>", each separated from the other by a \
                semicolon. E.g. "ppp0=PAS1;ppp1=PAS2".
    TYPE        char *
    DEFAULT     ""
}

Parameter PPP_IF_LCP_MRU_LIST {
    NAME        LCP maximum receive unit
    SYNOPSIS    Specifies interface LCP maximum receive unit. This parameter \
                is configurable on a per-interface basis in the form of \
                "<ifparam>=<value>", each separated from the other by a \
                semicolon. E.g, "ppp0=1500;ppp1=1500".
    TYPE        char *
    DEFAULT     ""
}

Parameter PPP_IF_LCP_MTU_LIST {
    NAME        LCP maximum transmit unit
    SYNOPSIS    Specifies interface LCP maximum transmit unit. This parameter \
                is configurable on a per-interface basis in the form of \
                "<ifparam>=<value>", each separated from the other by a \
                semicolon.. E.g, "ppp0=1500;ppp1=1500".
    TYPE        char *
    DEFAULT     ""
}

Parameter PPP_IF_LCP_ECHO_REQ_INTERVAL_LIST {
    NAME        Interface LCP echo requests interval
    SYNOPSIS    LCP echo request output interval in seconds. 0 to disable. \
                This parameter is configurable on a per-interface basis in \
                the form of "<ifparam>=<value>", each separated from the \
                other by a semicolon.. E.g, "ppp0=60;ppp1=60".
    TYPE        char *
    DEFAULT     ""
}

Parameter PPP_IF_LCP_ECHO_REQ_FAILURE_LIST {
    NAME        Echo failure
    SYNOPSIS    Max echo request failures before link termination. This \
                parameter is configurable on a per-interface basis in the \
                form of "<ifparam>=<value>", each separated from the other \
                by a semicolon. E.g, "ppp0=5;ppp1=5".
    TYPE        char *
    DEFAULT     ""
}

Parameter PPP_IF_IPCP_IPV4_ADDRESS_LIST {
    NAME        local IPv4 address list
    SYNOPSIS    Specifies the desired local IPv4 address. Setting local IPv4 \
                address to 0 means asking the peer to suggest our IPv4 \
                address. This parameter is configurable on a per-interface \
                basis in the form of "<ifparam>=<value>", each separated \
                from the other by a semicolon. \
                E.g, "ppp0=12.0.0.100;ppp1=12.1.0.100".
    TYPE        char *
    DEFAULT     ""
}

Parameter PPP_IF_IPCP_PEER_IPV4_ADDRESS_LIST {
    NAME        Peer IPv4 address list
    SYNOPSIS    Suggest peer IPv4 address if asked for. Note that the peer \
                IPv4 address will only get suggested to the peer if it ask \
                for it by requesting IP address 0. This parameter is \
                configurable on a per-interface basis in the form of \
                "<ifparam>=<value>", each separated from the other by a \
                semicolon. E.g, "ppp0=10.1.4.1;ppp1=10.2.4.1".
    TYPE        char *
    DEFAULT     ""
}

Parameter PPP_IF_IPCP_PEER_IPV4_ADDRESS_POOL_LIST {
    NAME        IPv4 peer address pool list
    SYNOPSIS    Configure a IPv4 address pool used for the interface to \
                supply peers with IPv4 addresses when running as a PPP or \
                PPPoE server. This parameter is configurable on a per-\
                interface basis in the form of "<ifparam>=<value>". Each \
                pair of "<ifparam>=<value>" is semicolon separated. \
                E.g., "ppp0=10.1.3.1-10.1.3.255".
    TYPE        char *
    DEFAULT     ""
}

Parameter PPP_IF_IPCP_PRIMARY_DNS_ADDRESS_LIST {
    NAME        Primary DNS Address list
    SYNOPSIS    Configures the PPP client IPv4 primary DNS address. The \
                configured IPv4 address will be given to the peer (the \
                client) if the peer requests a primary DNS address. This \
                parameter is configurable on a per-interface basis in the \
                form of "<ifparam>=<value>", each separated from the other \
                by a semicolon. E.g. "ppp0=10.1.2.3;ppp1=10.2.2.3".
    TYPE        char *
    DEFAULT     ""
}

Parameter PPP_IF_IPCP_SECONDARY_DNS_ADDRESS_LIST {
    NAME        Secondary DNS Address list
    SYNOPSIS    Configures the PPP client IPv4 secondary DNS address. The \
                configured IPv4 address will be given to the peer (the \
                client) if the peer requests a secondary DNS address. This \
                parameter is configurable on a per-interface basis in the \
                form of "<ifparam>=<value>", each separated from the other \
                by a semicolon. E.g. "ppp0=195.42.198.5;ppp1=195.43.198.5".
    TYPE        char *
    DEFAULT     ""
}

/* INCLUDE_IPPPP_USERS_CONFIG configuration parameters */
Parameter PPP_USERS_LCP_ECHO_REQ_INTERVAL_LIST {
    NAME        Users LCP echo requests interval
    SYNOPSIS    LCP echo request output interval in seconds. 0 to disable. \
                This parameter is configurable on a per-user basis in \
                the form of "<username>=<value>", each separated from the \
                other by a semicolon. E.g, "user1=60;user2=60".
    TYPE        char *
    DEFAULT     ""
}

Parameter PPP_USERS_IPCP_IPV4_ADDRESS_LIST {
    NAME        Users local IPv4 address list
    SYNOPSIS    Specifies the desired local IPv4 address. Setting local IPv4 \
                address to 0 means asking the peer to suggest our IPv4 \
                address. This parameter is configurable on a per-user \
                basis in the form of "<username>=<value>", each separated \
                from the other by a semicolon. \
                E.g, "user1=12.0.0.100;user2=12.1.0.100".
    TYPE        char *
    DEFAULT     ""
}

Parameter PPP_USERS_IPCP_PEER_IPV4_ADDRESS_LIST {
    NAME        Users Peer IPv4 address list
    SYNOPSIS    Suggest peer IPv4 address if asked for. Note that the peer \
                IPv4 address will only get suggested to the peer if it ask \
                for it by requesting IP address 0. This parameter is \
                configurable on a per-user basis in the form of \
                "<username>=<value>" each separated from the other by a \
                semicolon. E.g, "user1=10.1.4.1;user2=10.2.4.1".
    TYPE        char *
    DEFAULT     ""
}

Parameter PPP_USERS_IPCP_PEER_IPV4_ADDRESS_POOL_LIST {
    NAME        Users IPv4 peer address pool list
    SYNOPSIS    Configure a IPv4 address pool used for a user to supply \
                peers with IPv4 addresses when running as a PPP or PPPoE \
                server. This parameter is configurable on a per-user \
                basis in the form of "<username>=<value>", each separated \
                from the other by a semicolon. E.g., \
                "user1=10.1.3.1-10.1.3.255;user2=10.2.3.1-10.2.3.255"
    TYPE        char *
    DEFAULT     ""
}

Parameter PPP_USERS_IPCP_PRIMARY_DNS_ADDRESS_LIST {
    NAME        Users primary DNS Address list
    SYNOPSIS    Configures the PPP client IPv4 primary DNS address. The \
                configured IPv4 address will be given to the peer (the \
                client) if the peer requests a primary DNS address. This \
                parameter is configurable on a per-user basis in the \
                form of "<username>=<value>", each separated from the other \
                by a semicolon. E.g. "user1=10.1.2.3;user2=10.2.2.3".
    TYPE        char *
    DEFAULT     ""
}

Parameter PPP_USERS_IPCP_SECONDARY_DNS_ADDRESS_LIST {
    NAME        Users secondary DNS Address list
    SYNOPSIS    Configures the PPP client IPv4 secondary DNS address. The \
                configured IPv4 address will be given to the peer (the \
                client) if the peer requests a secondary DNS address. This \
                parameter is configurable on a per-user basis in the \
                form of "<username>=<value>", each separated from the other \
                by a semicolon. E.g. "user1=195.42.198.5;user2=195.43.198.5".
    TYPE        char *
    DEFAULT     ""
}

/* INCLUDE_IPPPPOE configuration parameters */
Parameter PPPOE_SERVER {
    NAME        Enable(1) /disable(0) PPPoE server
    SYNOPSIS    Enable(1) /disable(0) PPPoE server. If the option is set \
                to "1", PPPoE server is enabled, a value of "0" disabled \
                it for the whole device or for a specific interface.
    TYPE        char *
    DEFAULT     "0"
}

Parameter PPPOE_SECRET_NAME {
    NAME        PPPoE Secret
    SYNOPSIS    Secret name for PPPoE cookie. It is used in a MD5 checksum \
                calculation to thwart DOS (denial-of-service) attacks. The \
                definition of the string need not match any remote \
                configuration! The value should be changed from its factory \
                default.
    TYPE        char *
    DEFAULT     "puttoanythinghere"
}

Parameter PPPOE_MAX_SESSIONS {
    NAME        PPPoE Sessions
    SYNOPSIS    Maximum total number of PPPoE sessions allowed before \
                incoming PPPoE PADI packets are ignored, i.e. the PPPoE \
                server will not accept any additional connections.
    TYPE        char *
    DEFAULT     "16"
}

Parameter PPPOE_MAX_ETH_SESSIONS {
    NAME        PPPoE Sessions per Interface
    SYNOPSIS    Maximum number of PPPoE sessions per Ethernet interface. \
                Note that the interface name used is the Ethernet interface \
                name and not the pppoe interface name.
    TYPE        char *
    DEFAULT     "8"
}

Parameter PPPOE_AC_NAME {
    NAME        Access Concentrator
    SYNOPSIS    PPPoE Access Concentrator Name (AC-Name).
    TYPE        char *
    DEFAULT     "Windriver PPPoE Server"
}

Parameter PPPOE_SERVICE_NAME  {
    NAME        Service name
    SYNOPSIS    Service name to accept. Do not set the service name to \
                accept any service name.
    TYPE        char *
    DEFAULT     "myservice"
}

Parameter PPPOE_IF_MAX_ETH_SESSIONS_LIST {
    NAME        PPPoE Sessions list per Interface
    SYNOPSIS    Maximum number of PPPoE sessions per Ethernet interface. \
                Note that the interface name used is the Ethernet interface \
                name and not the pppoe interface name. This parameter is \
                configurable on a per-interface basis in the form of \
                "<ifparam>=<value>", each separated from the other by a \
                semicolon. E.g. "eth0=8;eth1=8".
    TYPE        char *
    DEFAULT     ""
}

Parameter PPPOE_IF_SERVICE_NAME_LIST {
    NAME        Service name list
    SYNOPSIS    Service name to accept. Do not set the service name to \
                accept any service name. This parameter is configurable on \
                a per-interface basis in the form of "<ifparam>=<value>", \
                each separated from the other by a semicolon. \
                E.g. "eth0=myservicename1;eth1=myservicename2".
    TYPE        char *
    DEFAULT     IP_NULL
}

/* INCLUDE_IPPPPMP configuration parameters */
Parameter PPPMP_ENABLE {
    NAME        Enable(1) /disable(0) PPP multilink
    SYNOPSIS    Enable(1) /disable(0) PPP multilink.  If the option is set \
                to "1", PPP multilink protocol is enabled, a value of "0" disables \
                it for the whole device or for a specific interface.
    TYPE        char *
    DEFAULT     "0"
}

Parameter PPPMP_MRRU {
    NAME        Maximum Reconstructed Receive Unit 
    SYNOPSIS    Maximum size for packets received using the multilink protocol \
                after being reconstructed, if necessary, from fragments received \
                over multiple links.
    TYPE        char *
    DEFAULT     "1500"
}

Parameter PPPMP_SSN {
    NAME        PPP MP Short Sequence Number header Enable(1) / Disable(0)  
    SYNOPSIS    Enable(1) / Disable(0) proposition of the PPP MP Short \
Sequence Number header option to be negotiated. \
If this option is set to "1", PPP MP Short Sequence \
Number headers option will be negotiated and in the case \
the peer accepts it - the PPP MP Short Sequence Number \
headers will be used. \
If this option is set to "0", the PPP MP Short Sequence \
Number headers option will not be proposed as an option \
for the negotiation, but if the peer will offer it then \
it will be accepted.\
Note, that RFC1990 specifies that default value has to \
be "0" and in the case device doesn't succeed to negotiate \
with peer Short Sequence Number option then \
Long Sequence Number will be used.
    TYPE        char *
    DEFAULT     "0"
}

Parameter PPPMP_FRAG_DISABLE {
    NAME        PPP MP PDU Fragmentation Disable (1) or Enable (0)  
    SYNOPSIS    PPP MP PDU Fragmentation Disable (1) or Enable (0). \
If this option is set to "1", PPP MP stack will try \
to prevent PDU fragmentation. \
In the case the PDU is smaller then link's MTU - \
it will be sent unfragmented. \
In the case the PDU is bigger then link's MTU - \
it will be fragmented.\
Note, that default value is 0 - it means that all MTUs \
will be fragmented.
    TYPE        char *
    DEFAULT     "0"
}

Parameter PPPMP_PPPOE_LINKS {
    NAME        PPPoE links
    SYNOPSIS    Number of links which will be started for multilink use when a PPPoE \
                interface is started. 
    TYPE        char *
    DEFAULT     "1"
}

Parameter PPPVJC_ENABLE {
    NAME        Enable(1) /disable(0) Van Jacobson TCP/IP header compression
    SYNOPSIS    Enable(1) /disable(0) Van Jacobson TCP/IP header compression If the 
                option is set to "1", VJC is enabled, a value of "0" disables \
                it for the whole device or for a specific interface.
    TYPE        char *
    DEFAULT     "0"
}