/* 00comp_ipnet_mobility_pm6.cdf - IPNet Mobility configuration file */

/*
 * Copyright (c) 2006-2007 Wind River Systems, Inc.
 *
 * The right to copy, distribute or otherwise make use of this software
 * may be licensed only pursuant to the terms of an applicable Wind River
 * license agreement. No license to Wind River intellectual property rights
 * is granted herein. All rights not licensed by Wind River are reserved
 * by Wind River.
 */

/*
modification history
--------------------
01b,14jul08,tlu  Fix a module name to fix the component greyed out in WB
01i,11may08,jho  created.
*/

#ifdef _WRS_CONFIG_COMPONENT_IPMIP6PM


Component INCLUDE_IPMIP6PM {
    NAME            IPv6 Mobility Access Gateway Agent
    SYNOPSIS        IPv6 Mobility Access Gateway Agent
    REQUIRES        INCLUDE_IPCOM_USE_INET6 INCLUDE_IPMIP6 SELECT_IPMIP6PM
    MODULES         ipmip6pm.o
    CONFIGLETTES    ipmip6pm_config.c
    CFG_PARAMS      MIP6PM_INTERFACES \
                    MIP6PM_LIFETIME_ENUM \
                    MIP6PM_INITIAL_REGISTRATION_TIMEOUT_ENUM \
                    MIP6PM_TIMESTAMP_BASED_APPROACH_IN_USE_ENUM \
                    MIP6PM_CARE_OF_ADDRESS_ENUM \
                    MIP6PM_TUNNEL_IP6IP6_ENUM \
                    MIP6PM_TUNNEL_GRE_ENUM \
                    MIP6PM_TUNNEL_GRE_PREFERRED_ENUM \
                    MIP6PM_TUNNEL_GRE_KEYED_ENUM \
                    MIP6PM_HEARTBEAT_ENABLED_ENUM \
                    MIP6PM_HEARTBEAT_INTERVAL_ENUM \
                    MIP6PM_MISSING_HEARTBEATS_ALLOWED_ENUM \
                    MIP6PM_LMA_ENUM \
                    MIP6PM_BINDING_REVOCATION_MIN_DELAY_ENUM \
                    MIP6PM_BINDING_REVOCATION_MAX_RETRIES_ENUM
}

Component INCLUDE_IPMIP6PM_LINK_FEATURE_LINK_LAYER_ADDRESS {
    NAME            IPv6 Mobility Access Gateway Link Feature FixedMAGLinkLayerAddressOnAllAccessLinks
    SYNOPSIS        IPv6 Mobility Access Gateway Link Feature FixedMAGLinkLayerAddressOnAllAccessLinks
    REQUIRES        INCLUDE_IPMIP6PM
    CFG_PARAMS      MIP6PM_FIXED_MAG_LINK_LAYER_ADDRESS_ON_ALL_ACCESS_LINKS_ENUM
}

Component INCLUDE_IPMIP6PM_LINK_FEATURE_LINK_LOCAL_ADDRESS {
    NAME            IPv6 Mobility Access Gateway Link Feature FixedMAGLinkLocalAddressOnAllAccessLinks
    SYNOPSIS        IPv6 Mobility Access Gateway Link Feature FixedMAGLinkLocalAddressOnAllAccessLinks
    REQUIRES        INCLUDE_IPMIP6PM
    CFG_PARAMS      MIP6PM_FIXED_MAG_LINK_LOCAL_ADDRESS_ON_ALL_ACCESS_LINKS_ENUM
}


Component INCLUDE_IPMIP6PM_DUAL_STACK {
    NAME            IPv6 Mobility Access Gateway Agent Dual Stack Support
    SYNOPSIS        IPv6 Mobility Access Gateway Agent Dual Stack Support
    REQUIRES        INCLUDE_IPMIP6PM
    CFG_PARAMS      MIP6PM_INET_CARE_OF_ADDRESS_ENUM \
                    MIP6PM_INET_USE_IPV4_UDP_ENCAP_FOR_SIGNALING_MESSAGES_ENUM \
                    MIP6PM_INET_FORCE_IPV4_UDP_ENCAPSULATION_SUPPORT_ENUM \
                    MIP6PM_INET_IPV4UDPENCAPSULATIONNATTIMEOUT_ENUM \
                    MIP6PM_INET_TUNNEL_IPIP_ENUM \
                    MIP6PM_INET_TUNNEL_GRE_ENUM
}

Component INCLUDE_IPMIP6PM_SERVICE_FEATURE_DHCP_RELAY {
    NAME            IPv6 Mobility Access Gateway Agent Service Feature DHCP Relay Support
    SYNOPSIS        IPv6 Mobility Access Gateway Agent Service Feature DHCP Relay Support
    REQUIRES        INCLUDE_IPMIP6PM
    CFG_PARAMS      MIP6PM_DHCP_RELAY_MODE_ENUM \
                    MIP6PM_DHCP_RELAY_SERVER_ENUM
}

Component INCLUDE_IPMIP6PM_SERVICE_FEATURE_RADVD {
    NAME            IPv6 Mobility Access Gateway Agent Service Feature RADVD Support
    SYNOPSIS        IPv6 Mobility Access Gateway Agent Service Feature RADVD Support. \
                    Will provide RADVD functionality on the access links. Unless \
                    you implement another address assignment feature, this \
                    service should always be included.
    REQUIRES        INCLUDE_IPMIP6PM
    CFG_PARAMS      MIP6PM_RADVD_MANAGED_ENUM \
                    MIP6PM_RADVD_OTHER_ENUM
}

Component INCLUDE_IPMIP6PM_SERVICE_FEATURE_SERVICE_SELECTION {
    NAME            IPv6 Mobility Access Gateway Agent Service Feature Service Selection Support
    SYNOPSIS        IPv6 Mobility Access Gateway Agent Service Feature Service Selection Support
    REQUIRES        INCLUDE_IPMIP6PM
    CFG_PARAMS      MIP6PM_SERVICE_SELECTION_ENUM
}

Component INCLUDE_IPMIP6PM_SERVICE_FEATURE_VENDOR_EXTENSION {
    NAME            IPv6 Mobility Access Gateway Agent Service Feature Generic Vendor Extension Support
    SYNOPSIS        IPv6 Mobility Access Gateway Agent Service Feature Generic Vendor Extension Support
    REQUIRES        INCLUDE_IPMIP6PM
    CFG_PARAMS      MIP6PM_VENDOR_EXTENSION_ENUM
}

Component INCLUDE_IPMIP6PM_DUAL_STACK_DHCP_RELAY_SUPPORT {
    NAME            IPv6 Mobility Access Gateway Dual Stack Internal DHCP Relay Support
    SYNOPSIS        IPv6 Mobility Access Gateway Dual Stack Internal DHCP Relay includes \
                    the integrated DHCP relay feature.
    REQUIRES        INCLUDE_IPMIP6PM_DUAL_STACK
    CFG_PARAMS      MIP6PM_INET_DHCP_RELAY_SERVER_ENUM \
                    MIP6PM_INET_DHCP_RELAY_SERVER_OVERRIDE_ENUM
}

Component INCLUDE_IPMIP6PM_DUAL_STACK_DHCP_SERVER_SUPPORT {
    NAME            IPv6 Mobility Access Gateway Dual Stack Internal DHCP Server Support
    SYNOPSIS        IPv6 Mobility Access Gateway Dual Stack Internal DHCP includes \
                    the integrated DHCP server feature.
    REQUIRES        INCLUDE_IPMIP6PM_DUAL_STACK
}

Component INCLUDE_IPMIP6PM_SERVICE_FEATURE_EXTENSION {
    NAME        IPv6 Mobility Access Gateway Service Feature Extension
    SYNOPSIS    This feature should be included if one wants to add \
                a new service feature to the mobility access gateway, and have the \
                feature hook being registered during initialization.
    REQUIRES    INCLUDE_IPMIP6PM
    CFG_PARAMS  MIP6PM_SERVICE_FEATURE_INITIALIZATION_HOOK
}

Component INCLUDE_IPMIP6PM_LINK_FEATURE_EXTENSION {
    NAME        IPv6 Mobility Access Gateway Link Feature Extension
    SYNOPSIS    This feature should be included if one wants to add \
                a new link feature to the mobility access gateway, and have the \
                feature hook being registered during initialization.
    REQUIRES    INCLUDE_IPMIP6PM
    CFG_PARAMS  MIP6PM_LINK_FEATURE_INITIALIZATION_HOOK
}

Selection SELECT_IPMIP6PM {
    NAME            Ipv6 Mobility Access Gateway Components
    SYNOPSIS        Ipv6 Mobility Access Gateway Components
    COUNT           0-
    REQUIRES        INCLUDE_IPMIP6PM
    _CHILDREN       FOLDER_MOBILITY_V6
    CHILDREN        INCLUDE_IPMIP6PM \
                    INCLUDE_IPMIP6PM_CMD \
                    INCLUDE_IPMIP6PM_DUAL_STACK \
                    INCLUDE_IPMIP6PM_DUAL_STACK_DHCP_RELAY_SUPPORT \
                    INCLUDE_IPMIP6PM_DUAL_STACK_DHCP_SERVER_SUPPORT \
                    INCLUDE_IPMIP6PM_LINK_FEATURE_LINK_LAYER_ADDRESS \
                    INCLUDE_IPMIP6PM_LINK_FEATURE_LINK_LOCAL_ADDRESS \
                    INCLUDE_IPMIP6PM_SERVICE_FEATURE_DHCP_RELAY \
                    INCLUDE_IPMIP6PM_SERVICE_FEATURE_RADVD \
                    INCLUDE_IPMIP6PM_SERVICE_FEATURE_SERVICE_SELECTION \
                    INCLUDE_IPMIP6PM_SERVICE_FEATURE_VENDOR_EXTENSION \
                    INCLUDE_IPMIP6PM_LINK_FEATURE_EXTENSION \
                    INCLUDE_IPMIP6PM_SERVICE_FEATURE_EXTENSION
    DEFAULTS        INCLUDE_IPMIP6PM \
                    INCLUDE_IPMIP6PM_CMD \
                    INCLUDE_IPMIP6PM_LINK_FEATURE_LINK_LAYER_ADDRESS \
                    INCLUDE_IPMIP6PM_LINK_FEATURE_LINK_LOCAL_ADDRESS \
                    INCLUDE_IPMIP6PM_SERVICE_FEATURE_DHCP_RELAY \
                    INCLUDE_IPMIP6PM_DUAL_STACK_DHCP_SERVER_SUPPORT \
                    INCLUDE_IPMIP6PM_SERVICE_FEATURE_RADVD \
                    INCLUDE_IPMIP6PM_SERVICE_FEATURE_SERVICE_SELECTION \
                    INCLUDE_IPMIP6PM_DUAL_STACK \
                    INCLUDE_IPMIP6PM_DUAL_STACK_DHCP_RELAY_SUPPORT
}

Component INCLUDE_IPMIP6PM_CMD {
    NAME        IPv6 Mobility Access Gateway IPCOM commands
    SYNOPSIS    IPv6 Mobility Access Gateway IPCOM commands
    MODULES     ipmip6pm_cmd_pm6.o
    REQUIRES    INCLUDE_IPCOM_SHELL_CMD INCLUDE_IPMIP6PM
}


Parameter MIP6PM_INTERFACES {
    NAME        Interface list
    SYNOPSIS    The interface list specifies what interfaces \
                should be configured for ;AG operation. This \
                parameter is a comma separated list of interfaces such \
                as "<ifname1>,<ifname2>" etc.
    TYPE        char *
    DEFAULT     ""
}

Parameter MIP6PM_LIFETIME_ENUM {
    NAME        Interface requested lifetime
    SYNOPSIS    The lifetime in seconds that the MAG will request from the LMA. \
                This value indicates the maximum lifetime length, since the LMA \
                may lower it. The default value is "60". Format for this \
                configuration item is a semi-colon separated list of interfaces \
                and lifetime values as specified by the following format string \
                "<ifname1>=<lifetime1>;<ifnameN>=<lifetimeN>"
    TYPE        char *
    DEFAULT     ""
}

Parameter MIP6PM_INITIAL_REGISTRATION_TIMEOUT_ENUM {
    NAME        Interface Initial Registration Timeout
    SYNOPSIS    Specifies the amount of time (in milliseconds) to wait for \
                the initial binding acknowledgement from the home agent. \
                The initial binding acknowledgement may take additional time \
                compared to subsequent ones, due to the requirement to \
                verify address usability. The default value is "1500". Format for \
                this configuration item is a semi-colon separated list of \
                interfaces and lifetime values as specified by the following \
                format string "<ifname1>=<timeout1>;<ifnameN>=<timeoutN>"
    TYPE        char *
    DEFAULT     ""
}

Parameter MIP6PM_TIMESTAMP_BASED_APPROACH_IN_USE_ENUM {
    NAME        Interface Timestamp Based Approach In Use
    SYNOPSIS    Specifies whether or not an interface should be using Timestamps \
                or Sequence numbers for replay and out-of-order protection. \
                By default the MAG will use Timestamps. The format for this \
                parameter is "<ifname1>=<enabled|disabled>;<ifnameN>=<enabled|disabled>"
    TYPE        char *
    DEFAULT     ""
}

Parameter MIP6PM_CARE_OF_ADDRESS_ENUM {
    NAME        Interface Care of Address
    SYNOPSIS    Specifies the INET6 Care-of-address that should be used by the MAG \
                for communication with the Home Agent/LMA. If not specified, the MAG. \
                will attempt to resolve it from the interface. If no address is \
                available, the interface will be disabled.. The format for this \
                parameter is "<ifname1>=<address1>;<ifnameN>=<addressN>"
    TYPE        char *
    DEFAULT     ""
}

Parameter MIP6PM_TUNNEL_IP6IP6_ENUM {
    NAME        Interface IPv6 tunneling
    SYNOPSIS    This configuration item specifies whether or not IPv6 tunneling \
                is allowed by the MAG. By default it is always "enabled". \
                This configuration parameter is specified by using a \
                semi-colon separated list of interface names and \
                disabled/enabled values, as specified by the format string \
                "<ifname1>=<enabled|disabled>;<ifnameN>=<enabled|disabled>"
    TYPE        char *
    DEFAULT     ""
}

Parameter MIP6PM_TUNNEL_GRE_ENUM {
    NAME        Interface IPv6 GRE tunneling
    SYNOPSIS    This configuration item specifies whether or not IPv6 GRE tunneling \
                is allowed by the MAG. By default it is always "enabled". \
                This configuration parameter is specified by using a \
                semi-colon separated list of interface names and \
                disabled/enabled values, as specified by the format string \
                "<ifname1>=<enabled|disabled>;<ifnameN>=<enabled|disabled>"
    TYPE        char *
    DEFAULT     ""
}

Parameter MIP6PM_TUNNEL_GRE_PREFERRED_ENUM {
    NAME        Interface IPv6 GRE Preferred tunneling
    SYNOPSIS    This configuration item specifies whether or not GRE tunneling \
                is preferred by the MAG. If preferred, the MAG will try to use \
                GRE initially, and if the LMA either forbids it or is unable \
                to handle it, revert to IPIP. By default this parameter is \
                "disabled". This configuration parameter is specified by using \
                a semi-colon separated list of interface names and \
                disabled/enabled values, as specified by the format string \
                "<ifname1>=<enabled|disabled>;<ifnameN>=<enabled|disabled>"
    TYPE        char *
    DEFAULT     ""
}

Parameter MIP6PM_TUNNEL_GRE_KEYED_ENUM {
    NAME        Interface IPv6 GRE Keyed tunneling
    SYNOPSIS    This configuration item specifies whether or not GRE tunneling \
                is keyed. By default Keyed GRE is "enabled". This configuration \
                parameter is specified by using a semi-colon separated list of interface \
                names and disabled/enabled values, as specified by the format string \
                "<ifname1>=<enabled|disabled>;<ifnameN>=<enabled|disabled>"
    TYPE        char *
    DEFAULT     ""
}

Parameter MIP6PM_HEARTBEAT_ENABLED_ENUM {
    NAME        Interface Proxy Mobility HEARTBEAT
    SYNOPSIS    This configuration option specifies whether or not the Heartbeat \
                feature is enabled for the specified interface. If no \
                configuration is provided, the feature is turned off. \
                The format for this configuration item is \
                a semi-colon separated list of "<ifname>=<enabled|disabled>".
    TYPE        char *
    DEFAULT     ""
}

Parameter MIP6PM_HEARTBEAT_INTERVAL_ENUM {
    NAME        Interface Proxy Mobility HEARTBEAT_INTERVAL
    SYNOPSIS    This variable is used to set the time interval in seconds \
                between two consecutive Heartbeat Request messages. The \
                default value is 60 seconds. It SHOULD NOT be set to less \
                than 30 seconds.The format for this configuration item is \
                a semi-colon separated list of "<ifname>=<interval>".
    TYPE        char *
    DEFAULT     ""
}

Parameter MIP6PM_MISSING_HEARTBEATS_ALLOWED_ENUM {
    NAME        Interface Proxy Mobility MISSING_HEARTBEATS_ALLOWED
    SYNOPSIS    This variable indicates the maximum number of consecutive \
                Heartbeat Request messages that a PMIPv6 node can miss before \
                concluding that the peer PMIPv6 node is not reachable.  The \
                default value for this variable is 3.\
                The format for this configuration item is a semi-colon \
                separated list of "<ifname>=<misses>".
    TYPE        char *
    DEFAULT     ""
}

Parameter MIP6PM_LMA_ENUM {
    NAME        Proxy Mobility Local Mobility Anchor Definitions
    SYNOPSIS    This configuration item specifies what LMAs \
                should be permanently added to the LMA database, \
                and whether or not they support HeartBeat. The MAG will \
                send an unsolicited HeartBeat response to each HeartBeat \
                enabled LMA during startup and reconfiguration. \
                The format for this configuration item is a semi-colon \
                separated list of "<LMA address>=<enabled|disabled>", where \
                <LMA Address> has the form <LMA INET6 Address>[/<LMA INET Address>]
    TYPE        char *
    DEFAULT     ""
}

Parameter MIP6PM_FIXED_MAG_LINK_LAYER_ADDRESS_ON_ALL_ACCESS_LINKS_ENUM {
    NAME        Interface Fixed MAG Link Layer Address on all Access Links
    SYNOPSIS    This parameter specifies what Link Layer address should be \
                used on all access links belonging to this proxy domain. The \
                format is specified as a link layer address. For example \
                ethernet would use XX:XX:XX:XX:XX:XX. The format for this \
                configuration item is a semi-colon \
                separated list of "<ifname1>=<Link Layer Address>". For example \
                "eth0=00:00:0a:0a:0a:0a"
    TYPE        char *
    DEFAULT     ""
}

Parameter MIP6PM_FIXED_MAG_LINK_LOCAL_ADDRESS_ON_ALL_ACCESS_LINKS_ENUM {
    NAME        Interface Fixed MAG Link Local Address on all Access Links
    SYNOPSIS    This configuration item specifies the Link Local Address that \
                should be used on all access links in this proxy mobility \
                domain. If not specified or set to "::", the LMA will allocate \
                a link local address for each session. The format for this \
                configuration item is a semi-colon separated list of \
                "<ifname1>=<Link Local Address>". For example "eth0=fe80::1/64"
    TYPE        char *
    DEFAULT     ""
}

Parameter MIP6PM_SERVICE_FEATURE_INITIALIZATION_HOOK {
    NAME        Mobility Access Gateway Service Feature Initialization Hook
    SYNOPSIS    This is the function hook that you may define in order to \
                register extra functional extensions to the Mobility Access \
                Gateway. The Service Features are provided after the \
                Link Features have been completed, so that the access \
                link should be fully up and running.
    TYPE        FUNCPTR
    DEFAULT     your_function_here
}

Parameter MIP6PM_LINK_FEATURE_INITIALIZATION_HOOK {
    NAME        Mobility Access Gateway Link Feature Initialization Hook
    SYNOPSIS    This is the function hook that you may define in order to \
                register extra functional extensions to the Mobility Access \
                Gateway. The Link Features are used to setup the access link \
                and will be invoked and provided prior to service features.
    TYPE        FUNCPTR
    DEFAULT     your_function_here
}


Parameter MIP6PM_DHCP_RELAY_MODE_ENUM {
    NAME        Mobility Access Gateway Service Feature DHCP Relay Mode
    SYNOPSIS    This option specifies the mode of the DHCP Relay. It may be \
                set to "disabled", "optional" or "required". If "required", \
                the relay will always be configured, if "optional" it may \
                be enabled by node specific arguments. Format for this \
                parameter is a semi-colon separated list of \
                "<ifname>=<disabled|optional|required>". Default value is \
                "optional".
    TYPE        char *
    DEFAULT     ""
}

Parameter MIP6PM_DHCP_RELAY_SERVER_ENUM {
    NAME        Mobility Access Gateway Service Feature DHCP Relay Server
    SYNOPSIS    This option specifies the DHCP server to be used. It may be \
                overriden by node specific arguments. If no server has been \
                specified, the home agent address will be used. Format for this \
                parameter is a semi-colon separated list of \
                "<ifname>=<address>"
    TYPE        char *
    DEFAULT     ""
}

Parameter MIP6PM_RADVD_MANAGED_ENUM {
    NAME        RADVD Managed Flag
    SYNOPSIS    Enable or disable the MANAGED flag for RADVD.Format for this \
                parameter is a semi-colon separated list of \
                "<ifname>=<true|false>"
    TYPE        char *
    DEFAULT     ""
}

Parameter MIP6PM_RADVD_OTHER_ENUM {
    NAME        RADVD Other Config Flag
    SYNOPSIS    Enable or disable the Other configuration flag for RADVD.\
                Format for this parameter is a semi-colon separated list of \
                "<ifname>=<true|false>"
    TYPE        char *
    DEFAULT     ""
}

Parameter MIP6PM_SERVICE_SELECTION_ENUM {
    NAME        Service Selection
    SYNOPSIS    Specify the Service Selection parameter. If specified, the.\
                MAG will provide the string to the LMA in order for the LMA \
                to setup the correct services. This configuration parameter \
                may be overriden by node specific arguments. Format for this \
                parameter is a semi-colon separated list of \
                "<ifname>=<service selection string>"
    TYPE        char *
    DEFAULT     ""
}

Parameter MIP6PM_INET_CARE_OF_ADDRESS_ENUM {
    NAME        Interface INET Care of Address
    SYNOPSIS    Specifies the INET Care-of-address that should be used by the MAG \
                for communication with the Home Agent/LMA. If not specified, the MAG. \
                will attempt to resolve it from the interface. The format for this \
                parameter is "<ifname1>=<address1>;<ifnameN>=<addressN>"
    TYPE        char *
    DEFAULT     ""
}

Parameter MIP6PM_INET_USE_IPV4_UDP_ENCAP_FOR_SIGNALING_MESSAGES_ENUM {
    NAME        Interface INET UseIPv4UDPEncapForSignalingMessages
    SYNOPSIS    This flag indicates whether or not the mobile access gateway \
                should use IPv4-UDP encapsulation mode for the signaling messages. \
                The default value for this flag is set to value of 0, indicating \
                that the mobile access gateway MUST NOT use IPv4-UDP encapsulation \
                mode, but MUST use native IPv4 encapsulation mode for sending the \
                Proxy Mobile IPv6 signaling messages. \
                When the value for this flag is set to value of 1, the mobile \
                access gateway MUST use IPv4-UDP encapsulation mode for sending \
                the Proxy Mobile IPv6 signaling messages. The format for this \
                parameter is "<ifname1>=<0|1>;<ifnameN>=<0|1>"
    TYPE        char *
    DEFAULT     ""
}


Parameter MIP6PM_INET_FORCE_IPV4_UDP_ENCAPSULATION_SUPPORT_ENUM {
    NAME        Interface INET ForceIPv4UDPEncapsulationSupport
    SYNOPSIS    This flag indicates whether or not the mobile access gateway \
                should request the mobile node's local mobility anchor for forcing \
                IPv4 UDP encapsulation support for the mobile node's data traffic, \
                even when NAT is not detected in the path. \
                The default value for this flag is set to value of 0, indicating \
                that the mobile access gateway MUST NOT request the mobile node's \
                local mobility anchor for forcing IPv4 UDP encapsulation support \
                even when NAT is not detected in path. \
                When the value for this flag is set to value of 1, the mobile \
                access gateway MUST force the mobile node's local mobility anchor \
                for IPv4 UDP encapsulation support. \
                This flag is applicable only when the flag \
                UseIPv4UDPEncapForSignalingMessages is set to a value of 1. \
                The format for this parameter is "<ifname1>=<0|1>;<ifnameN>=<0|1>"
    TYPE        char *
    DEFAULT     ""
}

Parameter MIP6PM_INET_IPV4UDPENCAPSULATIONNATTIMEOUT_ENUM {
    NAME        Interface INET UDP Encapsulation NAT Timeout
    SYNOPSIS    This parameter specifies the maximum time in seconds that the \
                MAG must send BUs to a LMA in order to maintain NAT translations \
                in the path. The default value is 110. The format for this \
                parameter is "<ifname1>=<timeout1>;<ifnameN>=<timeoutN>"
    TYPE        char *
    DEFAULT     ""
}

Parameter MIP6PM_INET_TUNNEL_IPIP_ENUM {
    NAME        INET IPIP tunneling
    SYNOPSIS    This configuration item specifies whether or not v4 IPIP tunneling \
                is allowed by the MAG for proxy mobility. By default all \
                interfaces enables IPIP tunneling. This configuration parameter \
                is specified by using a semi-colon separated list of interface \
                names and disabled/enabled values, as specified by the format \
                string "<ifname1>=<enabled|disabled>;<ifnameN>=<enabled|disabled>"
    TYPE        char *
    DEFAULT     ""
}

Parameter MIP6PM_INET_TUNNEL_GRE_ENUM {
    NAME        INET GRE tunneling
    SYNOPSIS    This configuration item specifies whether v4 GRE tunneling \
                is allowed by the MAG for Proxy Mobility. By default all \
                interfaces enables GRE. This configuration parameter is \
                specified by using a semi-colon separated list of interface \
                names and disabled/enabled values, as specified by the format string \
                "<ifname1>=<enabled|disabled>;<ifnameN>=<enabled|disabled>"
    TYPE        char *
    DEFAULT     ""
}

Parameter MIP6PM_INET_DHCP_RELAY_SERVER_ENUM {
    NAME        INET DHCP Relay Server
    SYNOPSIS    This configuration item specifies the DHCP server that DHCP \
                requests should be forwarded to. If this parameter is not \
                specified, the INET home agent is used. These parameters may \
                be overriden by node specific parameters. This parameter is \
                specified by using a semi-colon separated list of interface \
                names and INET address values, as specified by the format string \
                "<ifname1>=<DHCP server1>;<ifnameN>=<DHCP serverN>"
    TYPE        char *
    DEFAULT     ""
}

Parameter MIP6PM_INET_DHCP_RELAY_SERVER_OVERRIDE_ENUM {
    NAME        INET DHCP Relay Server Override
    SYNOPSIS    This configuration item specifies if the DHCP Relay should \
                request the use of DHCP server override. DHCP server override \
                may be required if the DHCP server is not co-located or \
                integrated with the Home Agent. This item is "true" by default. \
                This parameter is specified by using a semi-colon separated list \
                of interface names and true/false values, as specified by the \
                format string "<ifname1>=<true|false>;<ifnameN>=<true|false>"
    TYPE        char *
    DEFAULT     ""
}

Parameter MIP6PM_VENDOR_EXTENSION_ENUM {
    NAME        Generic Vendor Extension Configuration
    SYNOPSIS    If configured, will add Vendor Extension options to the \
                registration messages. The Generic vendor extension feature \
                does not do anything beyond providing the information in the \
                binding update. Extra features or functionalities acting upon \
                the vendor extensions are beyond the current scope of this \
                product. The format of the configuration parameter is a semi-colon\
                separated list of <SMI Number>.<SubType>=<value1>[,<valueN>]. \
                SMI Number is the IANA assigned SMI number. Subtype is the \
                vendor specified subtype. Value is defined as a string, or as \
                a comma separated array of hexadecimal numbers. The number of \
                hexadecimal figures in the value will define how the value is \
                interpreted. For example 0xaa is 1 byte, 0x00aa is two bytes, \
                0x0000aa will be interpreted as a four byte value. Values \
                larger than 1 byte will be converted to network byte order.
    TYPE        char *
    DEFAULT     ""
}

Parameter MIP6PM_BINDING_REVOCATION_MIN_DELAY_ENUM {
    NAME        MAG Minimum Delay Between BRI messages (MINDelayBRIs)
    SYNOPSIS    This variable specifies the delay time in milliseconds before \
                the revoking mobility entity retransmits a BRI message.  The \
                default is 1000 ms but not less than 500 ms.\
                This configuration parameter is specified by using a semi-colon \
                separated list of interface names and timeout values, as \
                specified by the format string \
                "<ifname1>=<milliseconds>;<ifnameN>=<milliseconds>"
    TYPE        char *
    DEFAULT     ""
}

Parameter MIP6PM_BINDING_REVOCATION_MAX_RETRIES_ENUM {
    NAME        MAG BRI Maximum Number of Retries (BRIMaxRetriesNumber)
    SYNOPSIS    This variable specifies the maximum Number of times a mobility \
                entity can retransmit a Binding Revocation Indication message \
                before receiving a Binding Revocation Acknowledgement message. \
                The default value for this parameter is 1. \
                This configuration parameter is specified by using a semi-colon \
                separated list of interface names and retransmit values, as \
                specified by the format string \
                "<ifname1>=<retransmits>;<ifnameN>=<retransmits>"
    TYPE        char *
    DEFAULT     ""
}

#endif