/* 02comp_ipnet_rohc.cdf - ROHC configuration file */

/*
 * Copyright (c) 2008 Wind River Systems, Inc.
 *
 * The right to copy, distribute or otherwise make use of this software
 * may be licensed only pursuant to the terms of an applicable Wind River
 * license agreement. No license to Wind River intellectual property rights
 * is granted herein. All rights not licensed by Wind River are reserved
 * by Wind River.
 */

/*
modification history
--------------------
01e,22feb10,ggz  Add TCP/IP profile components
01d,18dec09,ggz  Add ESP/IP, UDP/IP  profile components
01c,16apr08,tlu  Add F_MAX_PERIOD and F_MAX_TIME configuration parameters
01b,27feb08,tlu  Add profile components
01a,21feb08,tlu  Created.
*/

#ifdef _WRS_CONFIG_COMPONENT_IPROHC

Component INCLUDE_IPROHC {
    NAME            ROHC
    SYNOPSIS        Robust Header Compression
    MODULES         iprohc.o
    CONFIGLETTES    iprohc_config.c
    CFG_PARAMS      ROHC_INTERFACES \
		    ROHC_INTERFACE_PROFILES \
		    ROHC_MAX_CID \
		    ROHC_LARGE_CID \
		    ROHC_FEEDBACK_FOR_DEFINED \
		    ROHC_FEEDBACK_FOR \
		    ROHC_F_MAX_PERIOD \
		    ROHC_F_MAX_TIME
}

Component INCLUDE_IPROHC_CMD {
    NAME        ROHC commands
    SYNOPSIS    IPCOM shell commands for robust header compression
    MODULES     iprohc_cmd_rohc.o
    REQUIRES    INCLUDE_IPCOM_SHELL_CMD INCLUDE_IPROHC
}

Component INCLUDE_IPROHC_PROFILE_IP {
    NAME        ROHC IP Compression Profile
    SYNOPSIS    ROHC IP Compression Profile component 
    MODULES     iprohc_ip.o
    REQUIRES    INCLUDE_IPROHC
}

Component INCLUDE_IPROHC_PROFILE_UNCOMPRESSED {
    NAME        ROHC Uncompressed Profile
    SYNOPSIS    ROHC Uncompressed Profile component 
    MODULES     iprohc_uncompressed.o
    REQUIRES    INCLUDE_IPROHC
}

Component INCLUDE_IPROHC_PROFILE_ESP_IP {
    NAME        ROHC ESP/IP Profile
    SYNOPSIS    ROHC ESP/IP Profile component
    MODULES     iprohc_esp_ip.o
    REQUIRES    INCLUDE_IPROHC
}

Component INCLUDE_IPROHC_PROFILE_UDP_IP {
    NAME        ROHC UDP/IP Profile
    SYNOPSIS    ROHC UDP/IP Profile component
    MODULES     iprohc_udp_ip.o
    REQUIRES    INCLUDE_IPROHC
}

Component INCLUDE_IPROHC_PROFILE_TCP_IP {
    NAME        ROHC TCP/IP Profile
    SYNOPSIS    ROHC TCP/IP Profile component
    MODULES     iprohc_tcp_ip.o
    REQUIRES    INCLUDE_IPROHC
}

/******************** Configuration Parameters *****************************/

Parameter ROHC_INTERFACES {
    NAME        Interface List
    SYNOPSIS    List of interfaces on which the ROHC compresses and \
		decompresses the packets. e.g., "fei,1,fei,2" 
    TYPE        char *
    DEFAULT     ""
}

Parameter ROHC_INTERFACE_PROFILES {
    NAME        Interface Profile List
    SYNOPSIS    List of supported interface-profiles on which ROHC compresses \
		and decompresses the packets. The format is a \
		semicolon-separated list of interface-profile list, e.g., \
		"fei1,0;fei2,4", where means the interface fei1 supports \
		the profile 0 (uncompressed profile), and the interface fei2 \
		supports the profile 4 (IP profile).
    TYPE        char *
    DEFAULT     ""
}

Parameter ROHC_MAX_CID {
    NAME        Maximum Context Identifier
    SYNOPSIS    A nonnegative integer, the highest context identifier \
		number to be used by the compressor. Refer to RFC 3095, \
		section 5.1.1.
    TYPE        char *
    DEFAULT     "15"
}

Parameter ROHC_LARGE_CID {
    NAME        Used Context Identifier Representation 
    SYNOPSIS    Specifies what CID representation is used. If set to "0", \
		the short CID representation (0 byte or 1 prefix byte, \
		covering CID 0 to 15) is used; if set to "1", the embedded \
		CID representation (1 or 2 embedded CID bytes, covering \
		CID 0 to 16383) is used. Refer to RFC 3095, section 5.1.1.
    TYPE        char *
    DEFAULT     "0"
}

Parameter ROHC_FEEDBACK_FOR_DEFINED {
    NAME        FEEDBACK_FOR Parameter Defined
    SYNOPSIS    Control whetherFEEDBACK_FOR parameter is defined. If set \
		to "1", the FEEDBACK_FOR parameter is defined. If set \
		to "0", the FEEDBACK_FOR parameter is not defined.
    TYPE        char *
    DEFAULT     "0" 
}

Parameter ROHC_FEEDBACK_FOR {
    NAME        Feedback Channel 
    SYNOPSIS    Specifies which channel any feedback refers to. \
                Refer to RFC 3095, section 5.1.1. 
    TYPE        char *
    DEFAULT     "5"
}

Parameter ROHC_F_MAX_PERIOD {
    NAME        Maximum number of consecutive compressed headers 
    SYNOPSIS    Specifies the largest number of compressed headers that \
		may be sent without sending a full header. The valid range \
		is [1, 65535]. The default value is 256. \
                Refer to RFC 2507, section 14.
    TYPE        char *
    DEFAULT     "256"
}

Parameter ROHC_F_MAX_TIME {
    NAME        Maximum time period of consecutive compressed headers 
    SYNOPSIS    Specifies the maximum time period in seconds that compressed \
		headers may be sent without sending a full header. The valid \
		range is [1, 255]. The default value is 60. \
                Refer to RFC 2507, section 14.
    TYPE        char *
    DEFAULT     "60"
}

#endif