original files of m241

components/ip_net2-6.9/ipcom/include/ipcom_err.h

@@ -0,0 +1,306 @@
+/*
+******************************************************************************
+*                     HEADER FILE
+*
+*     Document no: @(#) $Name: VXWORKS_ITER40_RCPL8_2024030303 $ $RCSfile: ipcom_err.h,v $ $Revision: 1.14.170.1 $
+*     $Source: /home/interpeak/CVSRoot/ipcom/include/ipcom_err.h,v $
+*     $Author: jwang9 $ $Date: 2023-08-29 03:11:55 $
+*     $State: Exp $ $Locker:  $
+*
+*     INTERPEAK_COPYRIGHT_STRING
+*     Design and implementation by Lennart Bang <lob@interpeak.se>
+******************************************************************************
+*/
+#ifndef IPCOM_ERR_H
+#define IPCOM_ERR_H
+
+/*
+ ****************************************************************************
+ * 1                    DESCRIPTION
+ ****************************************************************************
+ */
+
+/*
+ ****************************************************************************
+ * 2                    CONFIGURATION
+ ****************************************************************************
+ */
+
+#include "ipcom_config.h"
+
+
+/*
+ ****************************************************************************
+ * 3                    INCLUDE FILES
+ ****************************************************************************
+ */
+
+#include "ipcom_cstyle.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ ****************************************************************************
+ * 4                    DEFINES
+ ****************************************************************************
+ */
+
+
+/*
+ *===========================================================================
+ *                         success/failure
+ *===========================================================================
+ */
+
+/* System call succeeded. */
+#define IPCOM_SUCCESS                  0
+
+/* System call failed (general failure). */
+#define IPCOM_ERR_FAILED              -1000
+
+
+/*
+ *===========================================================================
+ *                         general failures
+ *===========================================================================
+ */
+
+/* Operation failed because insufficient memory is available. */
+#define IPCOM_ERR_NO_MEMORY           -1010
+
+/* failed because (entry) not found. */
+#define IPCOM_ERR_NOT_FOUND           -1011
+
+/* failed because not supported. */
+#define IPCOM_ERR_NOT_SUPPORTED       -1012
+
+/* failed because permission denied. */
+#define IPCOM_ERR_PERMISSION_DENIED   -1013
+
+
+/*
+ *===========================================================================
+ *                         'already' failures
+ *===========================================================================
+ */
+
+/* failed to open because already opened. */
+#define IPCOM_ERR_ALREADY_OPEN        -1040
+
+/* failed to close because already closed. */
+#define IPCOM_ERR_ALREADY_CLOSED      -1041
+
+/* failed to install because already installed. */
+#define IPCOM_ERR_ALREADY_INSTALLED   -1042
+
+/* failed to start because already started. */
+#define IPCOM_ERR_ALREADY_STARTED     -1043
+
+
+/*
+ *===========================================================================
+ *                         'not' failures
+ *===========================================================================
+ */
+
+/* failed because not opened. */
+#define IPCOM_ERR_NOT_OPENED          -1050
+
+/* failed because not closed. */
+#define IPCOM_ERR_NOT_CLOSED          -1051
+
+/* failed because not installed. */
+#define IPCOM_ERR_NOT_INSTALLED       -1052
+
+/* Operation failed because interface is not started. */
+#define IPCOM_ERR_NOT_STARTED         -1053
+
+
+/*
+ *===========================================================================
+ *                         'invalid' failures
+ *===========================================================================
+ */
+
+/* Invalid argument in function call. */
+#define IPCOM_ERR_INVALID_ARG         -1060
+
+/* Invalid configuration. */
+#define IPCOM_ERR_INVALID_CONFIG      -1061
+
+/* Invalid version number. */
+#define IPCOM_ERR_INVALID_VERSION     -1062
+
+/* Invalid alignment. */
+#define IPCOM_ERR_INVALID_ALIGNMENT   -1063
+
+/* Invalid interface. */
+#define IPCOM_ERR_INVALID_INTERFACE   -1064
+
+
+/*
+ *===========================================================================
+ *                         route failures
+ *===========================================================================
+ */
+
+/* No such route. */
+#define IPCOM_ERR_NO_ROUTE            -1070
+
+/* Dead route, i.e. scheduled for deletion. */
+#define IPCOM_ERR_DEAD_ROUTE          -1071
+
+/* Invalid route syntax. */
+#define IPCOM_ERR_INVALID_ROUTE       -1072
+
+/* Invalid, i.e. non-10contiguous mask. */
+#define IPCOM_ERR_INVALID_MASK        -1073
+
+/* Invalid route client, e.g. not found. */
+#define IPCOM_ERR_INVALID_RTCLIENT    -1074
+
+
+/*
+ *===========================================================================
+ *                         entries failures
+ *===========================================================================
+ */
+
+/* Operation failed because there is a duplicate entry. */
+#define IPCOM_ERR_DUPLICATE           -1080
+
+/* Command failed because entry is locked. */
+#define IPCOM_ERR_LOCKED              -1081
+
+/* No more entries, end of operation, list, array etc. */
+#define IPCOM_ERR_END                 -1082
+
+/* Operation failed because entry is read only. */
+#define IPCOM_ERR_READONLY            -1083
+
+
+/*
+ *===========================================================================
+ *                         tag failures
+ *===========================================================================
+ */
+
+/* Invalid tag value. */
+#define IPCOM_ERR_INVALID_TAG_VALUE   -1090
+
+/* Unsupported tag. */
+#define IPCOM_ERR_UNSUPPORTED_TAG     -1091
+
+
+/*
+ *===========================================================================
+ *                         packet failures
+ *===========================================================================
+ */
+
+/* Invalid packet. */
+#define IPCOM_ERR_INVALID_PACKET      -1100
+
+/* Badly formatted, i.e. corrupt/invalid packet. */
+#define IPCOM_ERR_BAD_PACKET          -1101
+
+/* Packet ignored (not necessarily an error) */
+#define IPCOM_ERR_IGNORED_PACKET      -1102
+
+
+/*
+ *===========================================================================
+ *                         BSD failures
+ *===========================================================================
+ */
+
+/* System call failed due to BSD socket system-call failed. */
+#define IPCOM_ERR_SOCKCALLFAILED      -1110
+
+
+/*
+ *===========================================================================
+ *                         'min/max' failures
+ *===========================================================================
+ */
+
+/* Operation failed because minimum is reached. */
+#define IPCOM_ERR_REACHED_MIN         -1111
+
+/* Operation failed because maximum is reached. */
+#define IPCOM_ERR_REACHED_MAX         -1112
+
+
+/*
+ *===========================================================================
+ *                         system call failures
+ *===========================================================================
+ */
+
+/* Operation timed out and failed. */
+#define IPCOM_ERR_TIMEOUT             -1120
+
+/* Operation failed because blocking is illegal. */
+#define IPCOM_ERR_WOULDBLOCK          -1121
+
+/* Operation was interrupted */
+#define IPCOM_ERR_INTERRUPT           -1122
+
+/* Operation is pending. */
+#define IPCOM_ERR_PENDING             -1123
+
+
+/*
+ *===========================================================================
+ *                         authentication failures
+ *===========================================================================
+ */
+
+/* Operation failed because authentication failed. */
+#define IPCOM_ERR_AUTH_FAILED         -1130
+
+/* Unknown user in authentication. */
+#define IPCOM_ERR_AUTH_UNKNOWN        -1131
+
+/* Ntpq in use. */
+#define IPCOM_ERR_NTPQ_INUSE          -1132
+
+
+/*
+ ****************************************************************************
+ * 5                    TYPES
+ ****************************************************************************
+ */
+
+/*
+ ****************************************************************************
+ * 6                    FUNCTIONS
+ ****************************************************************************
+ */
+
+/*
+ *===========================================================================
+ *                    ipcom_err_string
+ *===========================================================================
+ * Description:   Return error string.
+ * Parameters:    Ip_err error code.
+ * Returns:       error string.
+ *
+ */
+IP_PUBLIC char *ipcom_err_string(Ip_err err);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+/*
+ ****************************************************************************
+ *                      END OF FILE
+ ****************************************************************************
+ */
+