original files of m241

components/ip_net2-6.9/ipcom/config/00comp_ipcom.cdf

@@ -0,0 +1,537 @@
+/* 00comp_ipcom.cdf - IPCom Component configuration file */
+
+/*
+ * Copyright (c) 2006-2010,2012 Wind River Systems, Inc.
+ *
+ * The right to copy, distribute or otherwise make use of this software
+ * may be licensed only pursuant to the terms of an applicable Wind River
+ * license agreement. No license to Wind River intellectual property rights
+ * is granted herein. All rights not licensed by Wind River are reserved
+ * by Wind River.
+ */
+
+/*
+modification history
+--------------------
+02a,13mar08,rjq Detach INCLUDE_SHELL from TELNETS and SSH
+01z,12nov22,j_y Added IPCOM_USER_SHELL_FUNCTION
+01y,12nov12,rjq Change the default user ID to be 0xFFFFFFFF.
+01x,02feb12,lzq Added INCLUDE_USE_WAITIF
+01w,19aug10,ggz Added SHA256 hash and salt support
+01v,08jun09,ggz Fix for defect WIND00167365
+01u,01may09,ggz Added hashing capability for ipcom auth
+01t,17apr09,rme Removed INCLUDE_USE_NATIVE_SHELL dependency on
+                INCLUDE_SHELL_INTERP_CMD.
+01s,03Sep08,brg Added ipcom_drv_mux.o for custom ARP hook support.
+01r,10sep07,mze INCLUDE_IPCOM_FS_SELECTION changed to SELECT_IPCOM_FS
+01q,04jul07,rme Replaced INCLUDE_IPCOM_SHELL_SELECTION with FOLDER_SHELLS
+                Also updated 00comp_ipnet_apps.cdf INCLUDE_IPTELNETS
+01p,07feb07,tkf Added INCLUDE_USE_NATIVE_SHELL dependency on
+                INCLUDE_SHELL_INTERP_CMD.
+01o,29jan07,tkf Added INCLUDE_USE_NATIVE_SHELL and
+                INCLUDE_IPCOM_SHELL_SELECTION. Also changed some component
+                attributes of INCLUDE_USE_IPCOM_SHELL.
+01n,20jan07,tkf Remove dependency on INCLUDE_XBD_RAMDRV Not required (WIND00085813).
+01m,19jan07,tkf Add INCLUDE_IPCOM_USE_RAM_DISK (WIND00085813).
+01l,08jan07,kch Added ipcom_ipd_config.c configlette to INCLUDE_IPCOM.
+01k,08jan07,kch Removed duplicate ipcom_config.c configlette from
+                INCLUDE_IPCOM_USE_AUTH.
+01j,07jan07,tkf Adjust INCLUDE_IPCOM_USE_VXSHELL_CMD component to accomodate
+                changes in latest code drop.
+01i,13dec06,tkf INCLUDE_IPCOM_USE_VXSHELL_CMD.
+01h,23sep06,kch Moved INCLUDE_IPCOM_USE_AUTH_RADIUS to 02comp_ipnet_radius.cdf.
+01g,28aug06,kch Added SELECT_IPCOM_AUTHENTICATION to corrected IPCom
+                authentication configuration support.
+01f,11aug06,tkf Remove INCLUDE_USE_IPCOM_SHELL dependency requirement on
+                INCLUDE_IPTELNETS.
+01e,10aug06,kch Moved syslogd to 'IPNet Shell Commands' folder.
+01d,02jul06,kch Added ipcom_drv_eth.o module to INCLUDE_IPCOM component.
+01c,30jun06,dlk Added INCLUDE_IPCOM_USE_SYSLOGD.
+01b,25jun06,dlk Make INCLUDE_IPCOM require INCLUDE_SOCKLIB and
+                INCLUDE_COMMON_NET. Specify initialization order for
+                INCLUDE_IPCOM in 00init_usernetwork.cdf, not here.
+01a,22may06,kch created.
+*/
+
+Component INCLUDE_IPCOM {
+    NAME            VxWorks IPCOM
+    SYNOPSIS        VxWorks IPCOM
+    MODULES         ipcom_vxworks.o ipcom_drv_eth.o ipcom_drv_mux.o
+    CONFIGLETTES    ipcom_config.c ipcom_ipd_config.c
+    LINK_SYMS       ipcom_register_dev_name_mapping
+    INIT_RTN	    ipcom_create ();
+    REQUIRES	    INCLUDE_IPCOM_USR
+    CFG_PARAMS      IPCOM_ENABLE_USER_SHELL \
+                    IPCOM_START_SHELL
+}
+
+Parameter IPCOM_ENABLE_USER_SHELL {
+    NAME        Enable IPCOM user shell
+    SYNOPSIS    Enable IPCOM user shell
+    TYPE        BOOL
+    DEFAULT     FALSE
+}
+
+Parameter IPCOM_START_SHELL {
+    NAME        IPCOM user start shell function
+    SYNOPSIS    IPCOM user start shell function
+    TYPE        FUNCPTR
+    DEFAULT     NULL
+}
+
+Component INCLUDE_IPCOM_USE_AUTH {
+    NAME            Use Authentication
+    SYNOPSIS        Use Authentication
+    MODULES         ipcom_auth.o ipcom_auth_login.o
+    REQUIRES	    INCLUDE_IPCOM_USR
+}
+
+Component INCLUDE_CUSTOM_PW_HASH {
+    NAME            Use Custom Password Hash Function
+    SYNOPSIS        Use Custom Password Hash Function
+    REQUIRES        INCLUDE_IPCOM_USE_AUTH
+    CFG_PARAMS	    IPCOM_AUTH_HASH_HOOK
+}
+
+Selection SELECT_IPCOM_AUTHENTICATION {
+    NAME            IPCOM authentication configurations
+    SYNOPSIS        IPCOM authentication configurations
+    COUNT           0-
+    CHILDREN        INCLUDE_IPCOM_AUTH_1 \
+                    INCLUDE_IPCOM_AUTH_2 \
+                    INCLUDE_IPCOM_AUTH_3 \
+                    INCLUDE_IPCOM_AUTH_4 \
+                    INCLUDE_IPCOM_AUTH_5 \
+                    INCLUDE_IPCOM_AUTH_6
+}
+
+Component INCLUDE_IPCOM_AUTH_1 {
+    NAME            Auth configuration #1
+    SYNOPSIS        Auth configuration #1
+    REQUIRES        INCLUDE_IPCOM_USE_AUTH
+    CFG_PARAMS      AUTH_USER_NAME1 AUTH_USER_PASSWD1 AUTH_USER_PASSWD1_SALT \
+                    AUTH_USER_ID1 AUTH_USER_PASSWD1_HASH
+}
+
+Component INCLUDE_IPCOM_AUTH_2 {
+    NAME            Auth configuration #2
+    SYNOPSIS        Auth configuration #2
+    REQUIRES        INCLUDE_IPCOM_USE_AUTH
+    CFG_PARAMS      AUTH_USER_NAME2 AUTH_USER_PASSWD2 AUTH_USER_PASSWD2_SALT \
+                    AUTH_USER_ID2 AUTH_USER_PASSWD2_HASH
+}
+
+Component INCLUDE_IPCOM_AUTH_3 {
+    NAME            Auth configuration #3
+    SYNOPSIS        Auth configuration #3
+    REQUIRES        INCLUDE_IPCOM_USE_AUTH
+    CFG_PARAMS      AUTH_USER_NAME3 AUTH_USER_PASSWD3 AUTH_USER_PASSWD3_SALT \
+                    AUTH_USER_ID3 AUTH_USER_PASSWD3_HASH
+}
+
+Component INCLUDE_IPCOM_AUTH_4 {
+    NAME            Auth configuration #4
+    SYNOPSIS        Auth configuration #4
+    REQUIRES        INCLUDE_IPCOM_USE_AUTH
+    CFG_PARAMS      AUTH_USER_NAME4 AUTH_USER_PASSWD4 AUTH_USER_PASSWD4_SALT \
+                    AUTH_USER_ID4 AUTH_USER_PASSWD4_HASH
+}
+
+Component INCLUDE_IPCOM_AUTH_5 {
+    NAME            Auth configuration #5
+    SYNOPSIS        Auth configuration #5
+    REQUIRES        INCLUDE_IPCOM_USE_AUTH
+    CFG_PARAMS      AUTH_USER_NAME5 AUTH_USER_PASSWD5 AUTH_USER_PASSWD5_SALT \
+                    AUTH_USER_ID5 AUTH_USER_PASSWD5_HASH
+}
+
+Component INCLUDE_IPCOM_AUTH_6 {
+    NAME            Auth configuration #6
+    SYNOPSIS        Auth configuration #6
+    REQUIRES        INCLUDE_IPCOM_USE_AUTH
+    CFG_PARAMS      AUTH_USER_NAME6 AUTH_USER_PASSWD6 AUTH_USER_PASSWD6_SALT \
+                    AUTH_USER_ID6 AUTH_USER_PASSWD6_HASH
+}
+
+Component INCLUDE_USE_IPCOM_SHELL {
+    NAME            Uses IPCOM-specific shell
+    SYNOPSIS        Uses IPCOM-specific shell
+    MODULES         ipcom_shell.o
+    LINK_SYMS       ipcom_start_shell
+    REQUIRES        INCLUDE_IPCOM
+    CFG_PARAMS      IPCOM_SHELL_PROMPT
+}
+
+Component INCLUDE_USE_NATIVE_SHELL {
+    NAME            Uses native VxWorks shell
+    SYNOPSIS        Uses native VxWorks shell
+    MODULES         ipcom_pshell.o
+    LINK_SYMS       ipcom_start_shell_native
+    REQUIRES        INCLUDE_IPCOM INCLUDE_SHELL INCLUDE_SHELL_INTERP_CMD
+    CFG_PARAMS      IPCOM_SHELL_PROMPT
+}
+
+Component INCLUDE_IPCOM_USE_VXSHELL_CMD {
+    NAME            IPCOM VxShell Command
+    SYNOPSIS        IP shell command to enter the VxWorks shell. The command blocks \
+                    until the VxWorks shell exits.
+    MODULES         ipcom_cmd_vxshell.o
+    LINK_SYMS       ipcom_cmd_vxshell
+    REQUIRES        INCLUDE_SHELL
+}
+
+Selection SELECT_IPCOM_SHELL {
+        NAME            Select the shell type to use
+        SYNOPSIS        Select the shell type to use
+        COUNT           1-1
+        CHILDREN        INCLUDE_USE_IPCOM_SHELL \
+                        INCLUDE_USE_NATIVE_SHELL
+        DEFAULTS        INCLUDE_USE_NATIVE_SHELL
+}
+
+Component INCLUDE_IPCOM_USE_RAM_DISK {
+    NAME            IPCOM RAM Disk Support
+    SYNOPSIS        Initialize VxWorks RAM Disk.
+    MODULES         ipcom_ramdisk.o
+    LINK_SYMS       vxfs_ramdisk_init
+}
+
+Component INCLUDE_IPCOM_FS_IPCOM {
+    NAME            IPCOM uses IPCOM-specific file system
+    SYNOPSIS        IPCOM uses IPCOM-specific file system
+    MODULES         ipcom_file.o
+    LINK_SYMS       ipcom_file_proc_exit
+}
+
+Component INCLUDE_IPCOM_FS_NATIVE {
+    NAME            IPCOM uses native VxWorks file system
+    SYNOPSIS        IPCOM uses native VxWorks file system
+    REQUIRES        INCLUDE_IPCOM_USE_RAM_DISK
+}
+
+Selection SELECT_IPCOM_FS {
+        NAME            IPCOM File System
+        SYNOPSIS        Select the IPCOM File System Type to use
+        COUNT           1-1
+        CHILDREN        INCLUDE_IPCOM_FS_NATIVE \
+                        INCLUDE_IPCOM_FS_IPCOM
+        DEFAULTS        INCLUDE_IPCOM_FS_NATIVE
+}
+
+Component INCLUDE_IPTELNETS {
+    NAME            TELNET Server
+    SYNOPSIS        TELNET Server
+    MODULES         ipcom_telnet.o
+    REQUIRES        INCLUDE_IPCOM INCLUDE_IPNET
+    _CHILDREN       FOLDER_TELNET
+    CONFIGLETTES    ipcom_telnets_config.c
+    CFG_PARAMS      IPCOM_TELNET_PORT \
+                    IPCOM_TELNET_MAX_CLIENTS \
+                    IPCOM_TELNET_IDLE_TIMEOUT
+}
+
+
+Component INCLUDE_IPCOM_USR {
+    NAME            IPCOM user side functions
+    SYNOPSIS        IPCOM user side functions
+    INIT_RTN	    ipcom_usr_create ();
+    _CHILDREN       FOLDER_NOT_VISIBLE
+}
+
+
+Component INCLUDE_USE_WAITIF {
+    NAME        Wait for an address available
+    SYNOPSIS    Wait for an address at VxWorks startup
+    MODULES     ipcom_waitif.o
+    INIT_RTN    ipcom_waitif_address ();
+    REQUIRES    INCLUDE_IPCOM
+    _CHILDREN   FOLDER_NET_CORE
+}
+
+
+/******************** Configuration Parameters *****************************/
+
+/* INCLUDE_IPCOM_AUTH_1 configuration parameters */
+Parameter AUTH_USER_NAME1 {
+    NAME        User name #1
+    SYNOPSIS    User name
+    TYPE        char *
+    DEFAULT     NULL
+}
+
+Parameter AUTH_USER_PASSWD1 {
+    NAME        Password #1
+    SYNOPSIS    Password
+    TYPE        char *
+    DEFAULT     NULL
+}
+
+Parameter AUTH_USER_PASSWD1_SALT {
+    NAME        Password salt #1
+    SYNOPSIS    Password salt
+    TYPE        char *
+    DEFAULT     NULL
+}
+
+Parameter AUTH_USER_ID1 {
+    NAME        Userid #1
+    SYNOPSIS    Userid. If userid is 0xFFFFFFFF then next available \
+                user ID will automatically be allocated.
+    TYPE        uint
+    DEFAULT     0xFFFFFFFF
+}
+
+Parameter AUTH_USER_PASSWD1_HASH {
+    NAME        Password #1 format
+    SYNOPSIS    Use this  parameter to specify the type of the entred password. \
+                Set to TRUE if the password is hashed. Set to FALSE if the password \
+                is in a cleartext format.
+    TYPE        BOOL
+    DEFAULT     FALSE
+}
+
+/* INCLUDE_IPCOM_AUTH_2 configuration parameters */
+Parameter AUTH_USER_NAME2 {
+    NAME        User name #2
+    SYNOPSIS    User name
+    TYPE        char *
+    DEFAULT     NULL
+}
+
+Parameter AUTH_USER_PASSWD2 {
+    NAME        Password #2
+    SYNOPSIS    Password
+    TYPE        char *
+    DEFAULT     NULL
+}
+
+Parameter AUTH_USER_PASSWD2_SALT {
+    NAME        Password salt #2
+    SYNOPSIS    Password salt
+    TYPE        char *
+    DEFAULT     NULL
+}
+
+Parameter AUTH_USER_ID2 {
+    NAME        Userid #2
+    SYNOPSIS    Userid. If userid is 0xFFFFFFFF then next available \
+                user ID will automatically be allocated.
+    TYPE        uint
+    DEFAULT     0xFFFFFFFF
+}
+
+Parameter AUTH_USER_PASSWD2_HASH {
+    NAME        Password #2 format
+    SYNOPSIS    Use this  parameter to specify the type of the entred password. \
+                Set to TRUE if the password is hashed. Set to FALSE if the password \
+                is in a cleartext format.
+    TYPE        BOOL
+    DEFAULT     FALSE
+}
+
+/* INCLUDE_IPCOM_AUTH_3 configuration parameters */
+Parameter AUTH_USER_NAME3 {
+    NAME        User name #3
+    SYNOPSIS    User name
+    TYPE        char *
+    DEFAULT     NULL
+}
+
+Parameter AUTH_USER_PASSWD3 {
+    NAME        Password #3
+    SYNOPSIS    Password
+    TYPE        char *
+    DEFAULT     NULL
+}
+
+Parameter AUTH_USER_PASSWD3_SALT {
+    NAME        Password salt #3
+    SYNOPSIS    Password salt
+    TYPE        char *
+    DEFAULT     NULL
+}
+
+Parameter AUTH_USER_ID3 {
+    NAME        Userid #3
+    SYNOPSIS    Userid. If userid is 0xFFFFFFFF then next available \
+                user ID will automatically be allocated.
+    TYPE        uint
+    DEFAULT     0xFFFFFFFF
+}
+
+Parameter AUTH_USER_PASSWD3_HASH {
+    NAME        Password #3 format
+    SYNOPSIS    Use this  parameter to specify the type of the entred password. \
+                Set to TRUE if the password is hashed. Set to FALSE if the password \
+                is in a cleartext format.
+    TYPE        BOOL
+    DEFAULT     FALSE
+}
+
+/* INCLUDE_IPCOM_AUTH_4 configuration parameters */
+Parameter AUTH_USER_NAME4 {
+    NAME        User name #4
+    SYNOPSIS    User name
+    TYPE        char *
+    DEFAULT     NULL
+}
+
+Parameter AUTH_USER_PASSWD4 {
+    NAME        Password #4
+    SYNOPSIS    Password
+    TYPE        char *
+    DEFAULT     NULL
+}
+
+Parameter AUTH_USER_PASSWD4_SALT {
+    NAME        Password salt #4
+    SYNOPSIS    Password salt
+    TYPE        char *
+    DEFAULT     NULL
+}
+
+Parameter AUTH_USER_ID4 {
+    NAME        Userid #4
+    SYNOPSIS    Userid. If userid is 0xFFFFFFFF then next available \
+                user ID will automatically be allocated.
+    TYPE        uint
+    DEFAULT     0xFFFFFFFF
+}
+
+Parameter AUTH_USER_PASSWD4_HASH {
+    NAME        Password #4 format
+    SYNOPSIS    Use this  parameter to specify the type of the entred password. \
+                Set to TRUE if the password is hashed. Set to FALSE if the password \
+                is in a cleartext format.
+    TYPE        BOOL
+    DEFAULT     FALSE
+}
+
+/* INCLUDE_IPCOM_AUTH_5 configuration parameters */
+Parameter AUTH_USER_NAME5 {
+    NAME        User name #5
+    SYNOPSIS    User name
+    TYPE        char *
+    DEFAULT     NULL
+}
+
+Parameter AUTH_USER_PASSWD5 {
+    NAME        Password #5
+    SYNOPSIS    Password
+    TYPE        char *
+    DEFAULT     NULL
+}
+
+Parameter AUTH_USER_PASSWD5_SALT {
+    NAME        Password salt #5
+    SYNOPSIS    Password salt
+    TYPE        char *
+    DEFAULT     NULL
+}
+
+Parameter AUTH_USER_ID5 {
+    NAME        Userid #5
+    SYNOPSIS    Userid. If userid is 0xFFFFFFFF then next available \
+                user ID will automatically be allocated.
+    TYPE        uint
+    DEFAULT     0xFFFFFFFF
+}
+
+Parameter AUTH_USER_PASSWD5_HASH {
+    NAME        Password #5 format
+    SYNOPSIS    Use this  parameter to specify the type of the entred password. \
+                Set to TRUE if the password is hashed. Set to FALSE if the password \
+                is in a cleartext format.
+    TYPE        BOOL
+    DEFAULT     FALSE
+}
+
+/* INCLUDE_IPCOM_AUTH_6 configuration parameters */
+Parameter AUTH_USER_NAME6 {
+    NAME        User name #6
+    SYNOPSIS    User name
+    TYPE        char *
+    DEFAULT     NULL
+}
+
+Parameter AUTH_USER_PASSWD6 {
+    NAME        Password #6
+    SYNOPSIS    Password
+    TYPE        char *
+    DEFAULT     NULL
+}
+
+Parameter AUTH_USER_PASSWD6_SALT {
+    NAME        Password salt #6
+    SYNOPSIS    Password salt
+    TYPE        char *
+    DEFAULT     NULL
+}
+
+Parameter AUTH_USER_ID6 {
+    NAME        Userid #6
+    SYNOPSIS    Userid. If userid is 0xFFFFFFFF then next available \
+                user ID will automatically be allocated.
+    TYPE        uint
+    DEFAULT     0xFFFFFFFF
+}
+
+Parameter AUTH_USER_PASSWD6_HASH {
+    NAME        Password #6 format
+    SYNOPSIS    Use this  parameter to specify the type of the entred password. \
+                Set to TRUE if the password is hashed. Set to FALSE if the password \
+                is in a cleartext format.
+    TYPE        BOOL
+    DEFAULT     FALSE
+}
+
+Parameter IPCOM_AUTH_HASH_HOOK {
+    NAME        User defined hash routine
+    SYNOPSIS    Use this pointer to define a user defined hashing function. \
+                The default function is ipcom_auth_default_hash_rtn, the \
+                same function used when INCLUDE_CUSTOM_PW_HASH is not \
+                included.
+    TYPE        Ipcom_auth_hash_hook
+    DEFAULT     ipcom_auth_default_hash_rtn
+}
+
+/* INCLUDE_USE_IPCOM_SHELL configuration parameters */
+
+Parameter IPCOM_SHELL_PROMPT {
+    NAME        IPCOM Shell Prompt
+    SYNOPSIS    The prompt displayed by the shell when it is waiting for \
+                commands. Supported special characters are: \
+                "\p" - shell process name \
+                "\P" - shell process id \
+                "\i" - the IP address of the target \
+                "\w" - the current working directory \
+                "\W" - the basename of the current working directory \
+                "\V" - ipcom_getenv("VR")
+    TYPE        char *
+    DEFAULT     "\\i$\\w>"
+}
+
+/* INCLUDE_IPTELNETS configuration parameters */
+Parameter IPCOM_TELNET_PORT {
+    NAME        IPCOM TELNET port
+    SYNOPSIS    IPCOM TELNET server port in host endian.
+    TYPE        char *
+    DEFAULT     "23"
+}
+
+Parameter IPCOM_TELNET_MAX_CLIENTS {
+    NAME        Maximum number of simultaneous TELNET clients
+    SYNOPSIS    IPCOM_TELNET_MAX_CLIENTS controls the maximum number of simultaneous \
+                telnet clients. If set to 0, the number is unlimited.
+    TYPE        char *
+    DEFAULT     "0"
+}
+
+Parameter IPCOM_TELNET_IDLE_TIMEOUT {
+    NAME        Idle timeout for telnet client
+    SYNOPSIS    Idle timeout(in minutes) for telnet client. If no any input during \
+                this period, the telnet client will be auto logout. If set to 0, the \
+                telnet client won't be logout.
+    TYPE        char *
+    DEFAULT     "360"
+}

components/ip_net2-6.9/ipcom/config/01comp_sec_key_db.cdf

@@ -0,0 +1,67 @@
+/* 01comp_sec_key_db.cdf - Secure Key DB configuration file */
+
+/*
+ * Copyright (c) 2006-2009 Wind River Systems, Inc.
+ *
+ * The right to copy, distribute or otherwise make use of this software
+ * may be licensed only pursuant to the terms of an applicable Wind River
+ * license agreement. No license to Wind River intellectual property rights
+ * is granted herein. All rights not licensed by Wind River are reserved
+ * by Wind River.
+ */
+
+/*
+modification history
+--------------------
+*/
+
+Folder KEY_DATABASE {
+   NAME            Key Database
+   SYNOPSIS        Key Database
+   CHILDREN        INCLUDE_IPCOM_USE_KEY_DB \
+   		   INCLUDE_IPCRYPTO_USE_KEY_DB_EXAMPLE_KEYS \
+                   INCLUDE_IPCOM_KEY_DB_CMD
+}
+
+Component INCLUDE_IPCOM_USE_KEY_DB {
+    NAME            IPCOM key database support
+    SYNOPSIS        The IPCOM key database stores keys in encrypted format. \
+    		    Please note that the IPCOM_KEY_DB_KEY_ENCRYPTING_KEY parameter \
+		    must be explicitly set.
+    MODULES         ipcom_key_db.o
+    LINK_SYMS       ipcom_key_db_buf_get
+    CFG_PARAMS      IPCOM_KEY_DB_KEY_ENCRYPTING_KEY IPCOM_KEY_DB_FILE_ROOT
+}
+
+Component INCLUDE_IPCRYPTO_USE_KEY_DB_EXAMPLE_KEYS {
+    NAME            IPCOM key database example keys
+    SYNOPSIS        Example RSA and DSA keys to use for demos and testing. Must not be    \
+    		    used in deployed systems.
+    REQUIRES	    INCLUDE_IPCOM_USE_KEY_DB
+}
+
+Component INCLUDE_IPCOM_KEY_DB_CMD {
+    NAME            IPCOM key database shell command
+    SYNOPSIS        Shell command to manipulate the IPCOM key database.
+    REQUIRES	    INCLUDE_IPCOM_USE_KEY_DB INCLUDE_IPCOM_SHELL_CMD
+}
+
+Parameter IPCOM_KEY_DB_KEY_ENCRYPTING_KEY {
+    NAME        Key Encrypting Key
+    SYNOPSIS    Key used to encrypt keys in the IPCOM key database. \
+    		This parameter should be set to a random string of at least 40 characters, \
+		containing both lower and upper case, numbers and special characters. \
+		IPCOM_KEY_DB_KEY_ENCRYPTING_KEY has no default value on purpose. This \
+		will force each customer to set a unique value.
+    TYPE        char *
+}
+
+Parameter IPCOM_KEY_DB_FILE_ROOT {
+    NAME        Key DB file root
+    SYNOPSIS    Top directory where the key DB directory structure shall be created. \
+    		For backwards compatibility reasons the default \
+		value is set to /ram. In deployed systems the key db file root would
+		be set to a directory in a persistent file system, e.g. /flash
+    TYPE        char *
+    DEFAULT	"/ram"
+}

components/ip_net2-6.9/ipcom/config/20Forwarder.cdf

@@ -0,0 +1,80 @@
+/*
+DESCRIPTION
+
+This file contains updated descriptions for some vxWorks components
+defined in 00Forwarder.cdf. It updates those definitions with new ones needed
+to support the coprocessor abstraction.
+*/
+
+
+Component	INCLUDE_P4080_VXB_FORWARDER {
+    NAME	    P4080 VxBus Driver forwarder support
+    SYNOPSIS	    Enables forwarding offload support. This is required when \
+libraries are built with IPCOM_USE_FORWARDER defined.  This component \
+requires either the INCLUDE_P4080_VXB_END VxBus network driver.
+
+    CONFIGLETTES    ipcom_config.c
+    _CHILDREN	    FOLDER_DRIVERS
+
+    INIT_RTN        ipcom_reserve_fw_cpu();
+    _INIT_ORDER     usrInit
+    INIT_AFTER      INCLUDE_BASE_KERNEL
+    INIT_BEFORE     INCLUDE_KERNEL
+    LINK_SYMS       ipcom_forwarder_create
+    _DEFAULTS       FOLDER_DRIVERS
+}
+
+Component	INCLUDE_P4080_FORWARDER_AMP_DATAPLANE {
+    NAME	    P4080 S-AMP forwarder acceleration core
+    SYNOPSIS	    Enable for a VB image that runs a forwarder acceleration \
+engine task in the P4080 supervised AMP system.  Requires libaries built with \
+IPCOM_USE_FORWARDER, IPCOM_FORWARDER_AMP, and IPCOM_USE_P4080_FORWARDER \
+defined.
+
+    CONFIGLETTES    ipcom_config.c
+    _CHILDREN	    FOLDER_DRIVERS
+
+    INIT_RTN        ipcom_forwarder_core_start();
+
+    _INIT_ORDER     usrRoot
+    INIT_BEFORE     usrNetworkInit
+    PROTOTYPE       extern void ipcom_forwarder (void);
+    LINK_SYMS       ipcom_forwarder
+    _DEFAULTS       FOLDER_DRIVERS
+}
+
+Parameter P4080_FORWARDER_CACHE_SIZE {
+    NAME        Forwarder flow cache size
+    SYNOPSIS    Number of entries in the FW cache. Allowed values are 256 \
+to 65536. This value is rounded upwards to the nearest power of 2; for \
+example, 4000 is rounded upwards to 4096.
+    TYPE        UINT
+    _CFG_PARAMS INCLUDE_P4080_VXB_FORWARDER
+    DEFAULT     4000
+}
+
+Parameter P4080_FORWARDER_MTU {
+    NAME        Nominal MTU for forwarder-capable network ports (1500 or 9000)
+    SYNOPSIS	All network ports in the system that support forwarding \
+                acceleration use this value as the nominal maximum MTU. \
+                The value should be 1500 or 9000.
+    TYPE        UINT
+    _CFG_PARAMS INCLUDE_P4080_VXB_FORWARDER
+    DEFAULT     1500
+}
+
+Parameter P4080_FORWARDER_NUMA_POOL_BASE {
+    NAME        Base Address of shared memory pool NUMA
+    SYNOPSIS	Base Address of the shared memory pool named NUMA \
+                used among the forwarders.
+    _CFG_PARAMS INCLUDE_P4080_VXB_FORWARDER INCLUDE_P4080_FORWARDER_AMP_DATAPLANE
+    DEFAULT     0xFC000000
+}
+
+Parameter P4080_FORWARDER_NUMA_POOL_SIZE {
+    NAME        Size of shared memory pool NUMA
+    SYNOPSIS	Base Address of the shared memory pool named NUMA \
+                used among the forwarders.
+    _CFG_PARAMS INCLUDE_P4080_VXB_FORWARDER INCLUDE_P4080_FORWARDER_AMP_DATAPLANE
+    DEFAULT     0x00800000
+}

components/ip_net2-6.9/ipcom/config/common.vxconfig

@@ -0,0 +1,12 @@
+#   Document no: @(#) $Name: VXWORKS_ITER40_2019102207 $ $RCSfile: common.vxconfig,v $ $Revision: 1.4 $
+#   $Source: /home/interpeak/CVSRoot/ipcom/config/common.vxconfig,v $
+#   $Author: rboden $
+#   $State: Exp $ $Locker:  $
+#
+#   INTERPEAK_COPYRIGHT_STRING
+
+#hidden option that enables IPFORWARDER
+config SUPPORTS_FORWARDER
+	bool
+	default y
+

components/ip_net2-6.9/ipcom/config/ipcom_config.h

@@ -0,0 +1,806 @@
+/*
+ ******************************************************************************
+ *                     INTERPEAK CONFIGURATION HEADER FILE
+ *
+ *   Document no: @(#) $Name: VXWORKS_ITER40_2019102207 $ $RCSfile: ipcom_config.h,v $ $Revision: 1.211.10.2 $
+ *   $Source: /home/interpeak/CVSRoot/ipcom/config/ipcom_config.h,v $
+ *   $Author: svc-cmnet $ $Date: 2013-03-13 07:45:13 $
+ *   $State: Exp $ $Locker:  $
+ *
+ *   INTERPEAK_COPYRIGHT_STRING
+ *   Design and implementation by Lennart Bang <lob@interpeak.se>
+ ******************************************************************************
+ */
+#ifndef IPCOM_CONFIG_H
+#define IPCOM_CONFIG_H
+
+/*
+ ****************************************************************************
+ * 1                    DESCRIPTION
+ ****************************************************************************
+ * Generic IPCOM Configuration. Also see config/ipcom_config.c.
+ *
+ * Also see port/<rtos>/config/ipcom_pconfig.h for RTOS port specific config.
+ */
+
+/*
+ ****************************************************************************
+ * 2                    PORT CONFIGURATION
+ ****************************************************************************
+ * Port configuration reside in port/<rtos>/config/ipcom_pconfig.h.
+ * Note:
+ * Do not EDIT the macros in this section, they only reside here because
+ * they must be defined before including ipcom_pconfig.h
+ */
+
+/* Valid IPCOM_USE_FILE, IPCOM_USE_SOCK, IPCOM_USE_SHELL #if values: */
+#define IPCOM_FILE_NONE    1
+#define IPCOM_FILE_IPCOM   2
+#define IPCOM_FILE_NATIVE  3
+
+#define IPCOM_SOCK_IPLITE   1
+#define IPCOM_SOCK_IPNET    2
+#define IPCOM_SOCK_IPCOM    3 /* IPNET or IPLITE */
+#define IPCOM_SOCK_NATIVE   4
+#define IPCOM_SOCK_NONE     5
+
+#define IPCOM_SHELL_NONE    1
+#define IPCOM_SHELL_MINI    2
+#define IPCOM_SHELL_IPCOM   3
+#define IPCOM_SHELL_NATIVE  4
+
+#define IPCOM_NETIF_IPCOM   1
+#define IPCOM_NETIF_NATIVE  2
+
+#define IPCOM_ENV_NONE      1
+#define IPCOM_ENV_IPCOM     2
+#define IPCOM_ENV_NATIVE    3
+
+/* Port specific configuration. */
+#include "ipcom_pconfig.h"
+
+#ifndef IPCOM_NO_SA_LEN
+#define IPCOM_USE_SA_LEN    1
+#endif
+
+#ifndef IPCOM_USE_FILE
+#define IPCOM_USE_FILE IPCOM_FILE_NATIVE
+#endif
+#if defined(IP_SIZE) && !defined(IPCRYPTO) && !defined(IPTFTPC) && !defined(IPTFTPS) && !defined(IPFTPC) && !defined(IPFTPS)
+#undef IPCOM_USE_FILE
+#define IPCOM_USE_FILE IPCOM_FILE_NONE
+#endif
+
+#ifndef IPCOM_USE_SOCK
+#if defined(IPNET) && defined(IPLITE)
+#error cant_define_IPNET_and_IPLITE___choose_one
+#elif defined(IPNET)
+#define IPCOM_USE_SOCK IPCOM_SOCK_IPNET
+#elif defined(IPLITE)
+#define IPCOM_USE_SOCK IPCOM_SOCK_IPLITE
+#elif defined(IP_PORT_OSE5)
+#define IPCOM_USE_SOCK IPCOM_SOCK_IPCOM
+#else
+#define IPCOM_USE_SOCK IPCOM_SOCK_NATIVE
+#endif
+#endif
+
+#ifdef IP_PORT_LKM
+#define IPCOM_USE_SHELL IPCOM_SHELL_NONE
+#else
+/* Remove shell if IPBUILD=size and IPSSH is not included in the build */
+#if defined(IP_SIZE) && !defined(IPSSH)
+#ifdef IPCOM_USE_SHELL
+#undef IPCOM_USE_SHELL
+#endif
+#define IPCOM_USE_SHELL IPCOM_SHELL_NONE
+#endif /* defined(IP_SIZE) && !defined(IPSSH) */
+#ifndef IPCOM_USE_SHELL
+#define IPCOM_USE_SHELL IPCOM_SHELL_IPCOM
+#endif
+#endif
+
+
+/*
+ ****************************************************************************
+ * 3                    INCLUDE FILES
+ ****************************************************************************
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/*
+ ****************************************************************************
+ * 4                    FEATURES
+ ****************************************************************************
+ */
+
+/* #define IP_ASSERT */
+
+/*
+ *===========================================================================
+ *                         IP_LW_DEBUG
+ *===========================================================================
+ * Define to include Light Weight debug features
+#define IP_LW_DEBUG
+ */
+
+#ifdef IP_LW_DEBUG
+#define IPCOM_FWD_PKT_POOL_DEBUG
+#endif
+
+/*
+ *===========================================================================
+ *                         IPCOM_NAE_HW_TX_CHKSUM
+ *===========================================================================
+ * Define when hardware has the ability to calculate TCP chksum on transmit
+#define IPCOM_NAE_HW_TX_CHKSUM
+ */
+
+
+
+#if defined(IPCOM_NAE_HW_TX_CHKSUM) && !defined(IPCOM_FORWARDER_NAE)
+#define IPCOM_FORWARDER_NAE
+#endif
+
+/*
+ *===========================================================================
+ *                         IPCOM_MAX_NAE
+ *===========================================================================
+ * Maximum number of NAE:s that is supported.
+ */
+#ifndef IPCOM_MAX_NAE
+#define IPCOM_MAX_NAE 8
+#endif
+
+/*
+ *===========================================================================
+ *                         IPCOM_NAE_UTIL
+ *===========================================================================
+ * Define to include nae utility functions:
+ *  nae_ping
+ *  nae_util
+ *  nae_topple
+ *  nae_enable
+ *  nae_disable
+ */
+#ifndef IP_PORT_UNIX
+#define IPCOM_NAE_UTIL
+#endif
+
+/*
+ *===========================================================================
+ *                         IPCOM_NAE_RAMLOG
+ *===========================================================================
+ * Define to enable "per NAE" ramlog. Use 'nae_ramlog <nae id>' to display log
+#define IPCOM_NAE_RAMLOG
+ */
+
+/*
+ *===========================================================================
+ *                         MIPC_POW_DEBUG
+ *===========================================================================
+ * Define to enable MIPC over Cavium POW debug printouts
+#define MIPC_POW_DEBUG
+ */
+
+/*
+ *===========================================================================
+ *                         IPCOM_MIPS_CALLSTACK
+ *===========================================================================
+ * Define to enable callstack evaluator for MIPS targets
+#define IPCOM_MIPS_CALLSTACK
+ */
+
+
+/* Automatically define IPCOM_NAE_DEBUG if sub-defines are set */
+#if defined(IPCOM_NAE_RAMLOG) || defined(IPCOM_MIPS_CALLSTACK)
+#ifndef IPCOM_NAE_DEBUG
+#define IPCOM_NAE_DEBUG
+#endif
+#endif
+
+/*
+ *===========================================================================
+ *                         IPCOM_USE_FORWARDER
+ *===========================================================================
+ * Define to include Multi-core polling forwarders.
+#define IPCOM_USE_FORWARDER
+ */
+
+/* Enable automatically if a forwarder type's been defined */
+#if defined(IPCOM_FORWARDER_NAE) || defined(IPCOM_FORWARDER_AMP) || defined(IPCOM_FORWARDER_SMP)
+#define IPCOM_USE_FORWARDER
+#define IPCOM_USE_FORWARDER_CACHE_WAYS
+#endif
+
+/*
+ *===========================================================================
+ *                         IPCOM_USE_FORWARDER_VLAN
+ *===========================================================================
+ * Define to include VLAN (Virtual LAN) support for Multi-core polling forwarders
+#define IPCOM_USE_FORWARDER_VLAN
+ */
+
+/*
+ *===========================================================================
+ *                         IPCOM_USE_FORWARDER_VLAN_STACKING
+ *===========================================================================
+ * Define to include VLAN stacking support for Multi-core polling forwarders
+#define IPCOM_USE_FORWARDER_VLAN_STACKING
+ */
+#ifdef _WRS_CONFIG_COMPONENT_VLAN_STACKING_FORWARDER
+#define IPCOM_USE_FORWARDER_VLAN_STACKING
+#endif
+
+
+/*
+ *===========================================================================
+ *                         SVLAN_SC_FWD_TABLE
+ *===========================================================================
+ * Define to enable establishing fast forward table on a SC VLAN port
+#define SVLAN_SC_FWD_TABLE
+ */
+#ifdef IPCOM_USE_FORWARDER_VLAN_STACKING
+#define SVLAN_SC_FWD_TABLE
+#endif
+
+
+/*
+ *===========================================================================
+ *                         IPCOM_USE_FORWARDER_CACHE_WAYS
+ *===========================================================================
+ * Define to use ways in the forwarding cache.
+ *
+ * Cache ways are used to handle collisions, i.e. when two or more flows use
+ * the same cache entry. When more than one cache way is configured there are
+ * alternative entries for colliding flows. Three definitions control how
+ * cache ways are used. Only one of these should typically be defined.
+ *
+ * IPCOM_USE_FORWARDER_CACHE_WAYS
+ * When defined 6 consecutive cache entries are avalaible to colliding flows
+ * This works for most application. The other defines are available for
+ * experimental use only.
+ *
+ * IPCOM_FORWARDER_CACHE_WAYS
+ * Define when more or less entries should be available to colliding flows.
+ *
+ * IPCOM_FORWARDER_TRUE_CACHE_WAYS_SHIFT
+ * A variant of cache ways is called "true cache ways". This reserves a number
+ * of cache entries for a set of flows. This is just a variant the would potentially
+ * allow a larger forwarding cache.
+
+Define one of the three below to use cache ways
+#define IPCOM_USE_FORWARDER_CACHE_WAYS
+#define IPCOM_FORWARDER_CACHE_WAYS (4)
+#define IPCOM_FORWARDER_TRUE_CACHE_WAYS_SHIFT (2)
+
+Define this to use upper bits rather than lower bits (experimental use only)
+#define IPCOM_FORWARDER_USE_UPPER_TAG_BITS
+ */
+
+/* #define IPCOM_USE_FORWARDER_CACHE_WAYS */
+/* #define IPCOM_FORWARDER_CACHE_WAYS (3) */
+/* #define IPCOM_FORWARDER_TRUE_CACHE_WAYS_SHIFT (2) */
+
+/* FIXME:
+   - Move parts of this to autoconf?
+   - Move _WRS_CONFIG switch to port/vxworks?
+*/
+
+#if defined(IPCOM_FORWARDER_CACHE_WAYS) && defined(IPCOM_FORWARDER_TRUE_CACHE_WAYS_SHIFT)
+#if IPCOM_FORWARDER_CACHE_WAYS != (1<<IPCOM_FORWARDER_TRUE_CACHE_WAYS_SHIFT)
+#error "IPCOM_FORWARDER_CACHE_WAYS != (1<<IPCOM_FORWARDER_TRUE_CACHE_WAYS_SHIFT)"
+#endif
+#endif
+
+#if defined(IPCOM_USE_FORWARDER_CACHE_WAYS) && !defined(IPCOM_FORWARDER_CACHE_WAYS)
+#define IPCOM_FORWARDER_CACHE_WAYS (6)
+#endif
+
+#if defined(IPCOM_FORWARDER_CACHE_WAYS) && !defined(IPCOM_USE_FORWARDER_CACHE_WAYS)
+#define IPCOM_USE_FORWARDER_CACHE_WAYS
+#endif
+
+#ifndef IPCOM_FORWARDER_TRUE_CACHE_WAYS_SHIFT
+#define IPCOM_FORWARDER_TRUE_CACHE_WAYS_SHIFT (0)
+#endif
+
+#if IPCOM_FORWARDER_TRUE_CACHE_WAYS_SHIFT > 0
+#ifndef IPCOM_USE_FORWARDER_CACHE_WAYS
+#define IPCOM_USE_FORWARDER_CACHE_WAYS
+#undef IPCOM_FORWARDER_CACHE_WAYS
+#define IPCOM_FORWARDER_CACHE_WAYS (1 << IPCOM_FORWARDER_TRUE_CACHE_WAYS_SHIFT)
+#endif
+#endif
+
+#define IPCOM_FORWARDER_TRUE_CACHE_WAYS (1 << IPCOM_FORWARDER_TRUE_CACHE_WAYS_SHIFT)
+
+/* The multi-core polling forwarders are supported only in MSP installations */
+#if !defined (IPNET_MSP_DISTRIBUTION)
+#undef IPCOM_USE_FORWARDER
+#undef IPCOM_USE_FORWARDER_VLAN
+#undef IPCOM_USE_FORWARDER_IPSEC
+#undef IPCOM_USE_FORWARDER_CACHE_WAYS
+#undef IPCOM_USE_FORWARDER_VLAN_STACKING
+#endif
+
+#ifndef IPCOM_USE_FORWARDER
+#if defined(IPCOM_USE_FORWARDER_VLAN) || \
+    defined(IPCOM_USE_FORWARDER_IPSEC) || \
+    defined(IPCOM_USE_FORWARDER_CACHE_WAYS) || \
+    defined(IPCOM_USE_FORWARDER_VLAN_STACKING)
+#define IPCOM_USE_FORWARDER
+#endif
+#endif
+
+#ifdef IPCOM_USE_FORWARDER
+
+#if defined(IP_PORT_VXWORKS)
+#if defined (__i386) || defined (__386)
+#define IPCOM_USE_NEHALEM_FORWARDER
+#define IPCOM_USE_NEHALEM_HYPERTHREAD
+
+/* Use a common transmit routine for both forwarder and NAE */
+#define ipcom_forwarder_tx_fw ipcom_forwarder_tx
+
+ /* The selective invalidation mechanism doesn't support VLAN forwarding */
+#ifndef IPCOM_USE_FORWARDER_VLAN
+#define IPCOM_FORWARDER_SELECTIVE_INVAL
+#endif
+
+#elif defined(_WRS_MIPS_N32_ABI)
+#define IPCOM_USE_OCTEON_FORWARDER
+
+#else
+/* else, assume p4080 */
+#define IPCOM_USE_P4080_FORWARDER
+#define IPCOM_PORTABLE_IPC_SPINLOCK
+#endif /* defined (__i386) || defined (__386) */
+
+#endif /* defined(IPCOM_PORT_VXWORKS) */
+
+/*
+ * For now, we assume an AMP forwarder in uniprocessor builds,
+ * and a non-AMP forwarder in SMP builds.
+ */
+#if !defined(IPCOM_FORWARDER_SMP) && !defined(IPCOM_FORWARDER_AMP) && !defined(IPCOM_FORWARDER_NAE)
+#ifdef IPCOM_USE_SMP
+#define IPCOM_FORWARDER_SMP
+#else /* IPCOM_USE_SMP */
+#define IPCOM_FORWARDER_AMP
+#endif /* IPCOM_USE_SMP */
+#endif /* !defined(IPCOM_FORWARDER_SMP) && !defined(IPCOM_FORWARDER_AMP) && !defined(IPCOM_FORWARDER_NAE) */
+
+#if defined(IPCOM_USE_NEHALEM_FORWARDER) || defined(IPCOM_USE_P4080_FORWARDER)
+#define IPCOM_FORWARDER_AMP
+#endif
+
+
+#define IPCOM_USE_HW_CHECKSUM_TX_DISABLED
+
+#ifndef IPCOM_USE_FORWARDER_CACHE_WAYS
+#define IPCOM_USE_FORWARDER_CACHE_WAYS
+#define IPCOM_FORWARDER_CACHE_WAYS (6)
+#define IPCOM_FORWARDER_TRUE_CACHE_WAYS_SHIFT (0)
+#define IPCOM_FORWARDER_TRUE_CACHE_WAYS (1 << IPCOM_FORWARDER_TRUE_CACHE_WAYS_SHIFT)
+#endif /* IPCOM_USE_FORWARDER_CACHE_WAYS */
+
+#endif /* IPCOM_USE_FORWARDER */
+
+#ifdef IPCOM_USE_FORWARDER
+/* #define IPCOM_USE_STANDARD_MIPC */
+#endif /* IPCOM_USE_FORWARDER */
+
+
+/*
+ *===========================================================================
+ *                         IPCOM_NAE_MULTICAST_MULTISEG
+ *===========================================================================
+ * Define to include multi-segment multi-port packet transmission on
+ * Intel Nehalem/Westmere forwarder
+#define IPCOM_NAE_MULTICAST_MULTISEG
+ */
+#if defined(IPCOM_USE_FORWARDER_VLAN_STACKING) && defined(IPCOM_USE_NEHALEM_FORWARDER)
+#define IPCOM_NAE_MULTICAST_MULTISEG
+#endif
+
+
+/*
+ *===========================================================================
+ *                         IPCOM_USE_FLOAT
+ *===========================================================================
+ * Define if want to support floating point and math operations.
+ */
+#if defined(IPSSL) || \
+    defined(IPCRYPTO) || \
+    defined(IPSSLPROXY) || \
+    defined(IPIKE) || \
+    defined(IPNTP) || \
+    defined(IPNGC) || \
+    defined(IPNETSNMP) || \
+    defined(IPNETPERF) || \
+    defined(ZEBOS)
+#define IPCOM_USE_FLOAT
+#endif
+
+
+/*
+ *===========================================================================
+ *                         IPCOM_USE_TIME
+ *===========================================================================
+ * Define if your RTOS port has implemented port/<rtos>/src/ipcom_time.c.
+ */
+#define IPCOM_USE_TIME
+
+
+/*
+ *===========================================================================
+ *                         IPCOM_USE_INET
+ *===========================================================================
+ * Define if your stack supports IPv4 and you want IPCOM IPv4 support.
+ */
+#ifndef IPCOM_EXCLUDE_INET
+#define IPCOM_USE_INET
+#endif
+
+
+/*
+ *===========================================================================
+ *                         IPCOM_USE_INET6
+ *===========================================================================
+ * Define if your stack supports IPv6 and you want IPCOM IPv6 support.
+ * Note: IPNET and IPLITE set this define in the makefile if IPv6 is
+ *       included in the release (e.g. see ipnet2/make/ipnet6.mk)
+ *
+ */
+#if defined(IP_PORT_UNIX) && IPCOM_USE_SOCK == IPCOM_SOCK_NATIVE \
+  && defined(IP_PORT_LINUX)
+#define IPCOM_USE_INET6
+#endif
+
+/*
+ *===========================================================================
+ *                         IPCOM_USE_SYSVAR
+ *===========================================================================
+ * Define for system variables.
+ */
+#define IPCOM_USE_SYSVAR
+
+/*
+ *===========================================================================
+ *                         IPCOM_USE_MD5
+ *===========================================================================
+ * Define for MD5 support to IPRIP, IPTCP, IPPPP and IPNET.
+ */
+#ifndef IP_PORT_LKM
+# if defined(IPCRYPTO) || defined(IPMCRYPTO) ||             \
+     (defined(IP_PORT_VXWORKS) && IP_PORT_VXWORKS >= 65) || \
+     defined(IP_PORT_OSE5)
+#  define IPCOM_USE_MD5
+# endif
+#endif /* #ifndef IP_PORT_LKM */
+
+/*
+ *===========================================================================
+ *                         IPCOM_USE_MIB2
+ *===========================================================================
+ * Define for mib-2 support
+#define IPCOM_USE_MIB2
+ */
+#if defined(VXCOMPAT) || (defined(IPSNMP) || defined(IPEMANATE) || defined(WRSNMP)) && (defined(IPNET) || defined(IPLITE))
+#define IPCOM_USE_MIB2
+#endif
+
+
+
+/*===========================================================================
+ *                         IPCOM_USE_MIB2_NEW
+ *===========================================================================
+ * Define to include support for the new IP version independent MIBs:
+ * RFC4022, RFC4113, RFC4292 and RFC4293
+#define IPCOM_USE_MIB2_NEW
+ */
+#if defined(VXCOMPAT) || defined(WRSNMP) && defined(IPNET)
+#define IPCOM_USE_MIB2_NEW
+#endif
+
+/* IPCOM_USE_MIB2_NEW requires IPCOM_USE_MIB2 */
+#if defined(IPCOM_USE_MIB2_NEW) && !defined(IPCOM_USE_MIB2)
+#undef IPCOM_USE_MIB2_NEW
+#endif
+
+
+/*
+ *===========================================================================
+ *                         IPCOM_USE_MIB2_CMD
+ *===========================================================================
+ * Define to include MIB-2 test command
+ */
+#ifdef IPCOM_USE_MIB2_NEW
+#define IPCOM_USE_MIB2_CMD
+#endif
+
+/* IPCOM_USE_MIB2_CMD requires IPCOM_USE_MIB2_NEW */
+#if defined(IPCOM_USE_MIB2_CMD) && !defined(IPCOM_USE_MIB2_NEW)
+#undef IPCOM_USE_MIB2_CMD
+#endif
+
+/*
+ *===========================================================================
+ *                         IPCOM_USE_SMPTEST_CMD
+ *===========================================================================
+ * Define to include SMP test command
+#define IPCOM_USE_SMPTEST_CMD
+ */
+
+
+/*
+ *===========================================================================
+ *                         IPCOM_VR_MAX
+ *===========================================================================
+ * Maximum number of virtualized entries, e.g. sysvars, routes etc.
+ * Not relevant on the LKM port.
+ */
+#if defined(_WRS_CONFIG_COMPONENT_VIRTUAL_ROUTER) || !defined(IP_PORT_VXWORKS)
+#define IPCOM_VR_MAX  8
+#else
+#define IPCOM_VR_MAX  1
+#endif
+
+
+/*
+ *===========================================================================
+ *                         IPCOM_USE_ENV
+ *===========================================================================
+ * Define for process specific environment variables. If set to IPCOM_ENV_NONE,
+ * environment variables are implemented using sysvars, i.e. global.
+ */
+#if !defined(IPCOM_USE_ENV)
+#if defined(IP_PORT_VXWORKS) || defined(IP_PORT_OSE) || defined(IP_PORT_OSE5)
+#define IPCOM_USE_ENV  IPCOM_ENV_NATIVE
+#else
+#define IPCOM_USE_ENV  IPCOM_ENV_IPCOM
+#endif
+#endif
+
+/*
+ *===========================================================================
+ *                         IPCOM_USE_KEY_DB
+ *===========================================================================
+ * Define to enable a key database that provides basic protection for public
+ * keys and pre-shared keys.
+ */
+#if defined(IPCRYPTO) || defined(IPMCRYPTO)
+# define IPCOM_USE_KEY_DB
+# define IPCOM_USE_KEY_DB_CMD
+# define IPCOM_USE_KEY_DB_CMD_VERIFY
+#endif
+
+/*
+ ****************************************************************************
+ * 5                    SERVICES
+ ****************************************************************************
+ */
+
+/*
+ *===========================================================================
+ *                         IPCOM EGD
+ *===========================================================================
+ * Interpeak Entropy Gathering Daemon used for ipcom_random().
+ * If not defined, a simplistic pseudo-random routine is used
+ * to generate the random numbers in ipcom_random().
+ * For code, see ipcom/port/src/ipcom_random.c
+ */
+#if defined(IPSSL) || defined(IPCRYPTO) || defined(IPMCRYPTO)
+#define IPCOM_USE_EGD
+#endif
+
+
+/*
+ *===========================================================================
+ *                         IPCOM_SYSLOG_PRIO_DEFAULT
+ *===========================================================================
+ * Initial syslog system build-time priority. Changing these levels change
+ * the compiled in log level for all products.
+ */
+#if defined(_WRS_CONFIG_IPCOM_DEFAULT_SYSLOG_PRIORITY)
+# define IPCOM_SYSLOG_PRIO_DEFAULT _WRS_CONFIG_IPCOM_DEFAULT_SYSLOG_PRIORITY
+#elif defined(IP_DEBUG)
+# define IPCOM_SYSLOG_PRIO_DEFAULT   7 /* IPCOM_LOG_DEBUG2 */
+#else
+# define IPCOM_SYSLOG_PRIO_DEFAULT   3 /* IPCOM_LOG_WARNING */
+#endif
+
+
+/*
+ *===========================================================================
+ *                         IPCOM_SYSLOG_IPCOM_PRIORITY
+ *===========================================================================
+ * Initial IPCOM syslog build-time priority.
+ */
+#define IPCOM_SYSLOG_IPCOM_PRIORITY IPCOM_SYSLOG_PRIO_DEFAULT
+
+
+/*
+ *===========================================================================
+ *                         IPCOM_LOG_USE_OF_DEPRECATED_API
+ *===========================================================================
+ * Log use of deprecated APIs. Only first call will be logged.
+ */
+#ifdef IP_DEBUG
+#define IPCOM_LOG_USE_OF_DEPRECATED_API
+#endif
+
+
+/*
+ *===========================================================================
+ *                         IPCOM SYSLOG
+ *===========================================================================
+ * Define to enable use of syslogs using the syslog daemon.
+ */
+#if !defined(IPCOM_SYSLOG) \
+    && !defined(IP_PORT_OSECK) \
+    && !defined(IP_PORT_LKM) \
+    && !defined(IP_SIZE) \
+    && !defined(IPBASIC) \
+    && !defined(IPCOM_FORWARDER_NAE) \
+    && !defined(IPCOM_FORWARDER_AMP) \
+    && !defined(IPLITE)
+#define IPCOM_USE_SYSLOG
+#endif
+
+
+/*
+ *===========================================================================
+ *                         IPCOM AUTH
+ *===========================================================================
+ * Enable IPCOM authentication - ipcom_auth.h
+ */
+#if defined(IPSSH) /* So IPSSH can use the default AUTH function */ \
+    || (!defined(IP_PORT_OSECK) \
+     && !defined(IP_PORT_LKM) \
+     && !defined(IPBASIC) \
+     && !defined(IPCOM_FORWARDER_NAE) \
+     && !defined(IPCOM_FORWARDER_AMP))
+#define IPCOM_USE_AUTH
+#endif
+
+/* Use RADIUS client to lookup user & password. */
+#if defined(IPCOM_USE_AUTH) && defined(IPRADIUS) && (defined(IPNET) || defined(IPLITE))
+#define IPCOM_USE_AUTH_RADIUS
+#endif
+
+
+/*
+ *===========================================================================
+ *                         IPCOM TELNET
+ *===========================================================================
+ * IPCOM telnet server. Also see ipcom_telnets_config.c for telnet port.
+ */
+
+/* Define to start the interpeak telnet server. */
+#if (IPCOM_USE_SHELL == IPCOM_SHELL_IPCOM || IPCOM_USE_SHELL == IPCOM_SHELL_NATIVE) \
+    && (defined(IPTCP) || IPCOM_USE_SOCK == IPCOM_SOCK_NATIVE || defined(IPLITE)) \
+    && !defined(IP_PORT_OSE5) \
+    && !defined(OSE_REFSYS) \
+    && !defined(IP_PORT_INTEGRITY)
+#define IPTELNETS
+#endif
+
+
+/*
+ *===========================================================================
+ *                         IPCOM FILE
+ *===========================================================================
+ * Interpeak memory file system.
+ */
+
+/* Maximum number of open files with IPCOM memory filesystem: ipcom_file.c.
+ * (used if compiled with IPCOM_USE_FILE == IPCOM_FILE_IPCOM
+ * Note: the actual max is three lower due to unused 0-2 slots.
+ */
+#define IPCOM_FILE_FD_SETSIZE   64
+
+
+/*
+ *===========================================================================
+ *                         IPCOM_DRV
+ *===========================================================================
+ * Generic IPCOM PPP and Ethernet driver configuration.
+ */
+
+/* Default PPP baudrate in ipcom_drv_ppp.c used by IPNET/IPLITE. */
+#define IPCOM_DRV_PPP_BAUDRATE      38400
+
+/*
+ *===========================================================================
+ *                  IPCOM_GETLINE_HISTORY_FILENAME
+ *===========================================================================
+ * Filename where the IPCOM getline will save the history when an IPCOM
+ * shell exits.
+ */
+#define IPCOM_GETLINE_HISTORY_FILENAME   ".ipcom_getline_history"
+
+
+/*
+ ****************************************************************************
+ * 6                    AUTO configuration
+ ****************************************************************************
+ */
+
+#include "ipcom_autoconf.h"
+
+
+/*
+ ****************************************************************************
+ * 7                    MORE configuration
+ ****************************************************************************
+ */
+
+/*
+ *===========================================================================
+ *                         IPCOM_STDIO_BUFSIZE
+ *===========================================================================
+ * Maximum I/O bufsize, e.g. for ipcom_prinf(), ipcom_fprintf() etc.
+ */
+#define IPCOM_STDIO_BUFSIZE   3000
+
+
+/*
+ *===========================================================================
+ *                         IPCOM SHELL
+ *===========================================================================
+ * IPCOM login shell config macro. Also see config/ipcom_config.c for additional
+ * shell configuration constants.
+ */
+
+/* Maximum length of current working directory */
+#define IPCOM_SHELL_MAX_PATH     256
+
+
+/* Define if you want alias expansion in the IPCOM Shell */
+#if IPCOM_USE_SHELL == IPCOM_SHELL_IPCOM
+/* #define IPCOM_USE_ALIAS 1 */
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+
+/*
+ *===========================================================================
+ *                         IPCOM_USE_BITARRAY
+ *===========================================================================
+ * Define for including bitarray.
+ */
+#define IPCOM_USE_BITARRAY
+
+/*
+ *===========================================================================
+ *                         IPCOM_USE_MUX_DRV
+ *===========================================================================
+ * Define for using the mux driver
+ */
+#define IPCOM_USE_MUX_DRV
+
+/*
+ *===========================================================================
+ *                         IPCOM_USE_NON_ETHERNET
+ *===========================================================================
+ * Define for support non-ethernet interface
+ */
+#if defined(IPCOM_USE_INET) || defined(IPCOM_USE_INET6)
+#define IPCOM_USE_NON_ETHERNET
+#endif
+
+
+#endif
+/*
+ ****************************************************************************
+ *                      END OF FILE
+ ****************************************************************************
+ */

components/ip_net2-6.9/ipcom/config/ipcom_telnets_config.c

@@ -0,0 +1,143 @@
+/*
+ ******************************************************************************
+ *                     IPCOM CONFIGURATION SOURCE FILE
+ *
+ *   Document no: @(#) $Name: VXWORKS_ITER40_2019102207 $ $RCSfile: ipcom_telnets_config.c,v $ $Revision: 1.10.18.4 $
+ *   $Source: /home/interpeak/CVSRoot/ipcom/config/ipcom_telnets_config.c,v $
+ *   $Author: jren $
+ *   $State: Exp $ $Locker:  $
+ *
+ *   INTERPEAK_COPYRIGHT_STRING
+ *   Design and implementation by Lennart Bang <lob@interpeak.se>
+ ******************************************************************************
+ */
+
+
+/*
+ ****************************************************************************
+ * 1                    DESCRIPTION
+ ****************************************************************************
+ */
+
+/*
+ ****************************************************************************
+ * 2                    INCLUDE FILES
+ ****************************************************************************
+ */
+
+#include "ipcom_config.h"
+
+#define IPCOM_USE_CLIB_PROTO
+#include "ipcom_type.h"
+#include "ipcom_cstyle.h"
+#include "ipcom_err.h"
+#include "ipcom_sysvar.h"
+
+
+/*
+ ****************************************************************************
+ * 3                    LOCAL PROTOTYPES
+ ****************************************************************************
+ */
+
+IP_PUBLIC Ip_err iptelnets_configure(void);
+
+
+/*
+ ****************************************************************************
+ * 5                    DATA
+ ****************************************************************************
+ */
+
+/*
+ *===========================================================================
+ *                         SYSTEM VARIABLES
+ *===========================================================================
+ */
+IP_STATIC IP_CONST Ipcom_sysvar iptelnets_conf_sysvar[] =
+{
+    /* Telnet port */
+#if defined(IPCOM_TELNET_PORT)
+    { "ipcom.telnet.port", IPCOM_TELNET_PORT },
+#else
+    { "ipcom.telnet.port", "2323" },
+#endif
+
+#if IPCOM_USE_SHELL == IPCOM_SHELL_IPCOM
+    /* Shell greeting. */
+    { "ipcom.shell.greeting", "Copyright (c) Interpeak AB 2000-2010. All rights reserved.\n\nWelcome to IPCOM SHELL. Type help for a list of commands.\n\n" },
+
+    /* Shell prompt. Supported special characters are:
+     *     \p - shell process name
+     *     \P - shell process id
+     *     \i - the IP address of the target
+     *     \w - the current working directory
+     *     \W - the basename of the current working directory
+     *     \V - ipcom_getenv("VR")
+     */
+    /*{ "ipcom.shell.prompt", "\\i$\\w> " },*/
+    { "ipcom.shell.prompt", "\\i#\\V> " },
+#endif /* IPCOM_USE_SHELL == IPCOM_SHELL_IPCOM */
+
+#ifndef IP_PORT_VXWORKS
+#ifdef IPCOM_USE_AUTH
+    /* Require telnet users to authenticate (1 = enabled, 0 = disabled) */
+    { "ipcom.telnet.authenticate", "0" },
+#endif
+#endif
+#ifdef IPCOM_TELNET_MAX_CLIENTS
+    { "ipcom.telnet.max_sessions", IPCOM_TELNET_MAX_CLIENTS },
+#endif
+#ifdef IPCOM_TELNET_IDLE_TIMEOUT
+	{ "ipcom.telnet.idle_timeout", IPCOM_TELNET_IDLE_TIMEOUT },
+#endif
+#ifdef IP_PORT_VXWORKS
+    /* 
+     * Priority of ipcom_telnetd task, from 1 - 7,
+     *  1 - IPCOM_PROC_PRIO_1
+     *  2 - IPCOM_PROC_PRIO_2
+     *  3 - IPCOM_PROC_PRIO_3
+     *  4 - IPCOM_PROC_PRIO_4
+     *  5 - IPCOM_PROC_PRIO_5
+     *  6 - IPCOM_PROC_PRIO_6
+     *  7 - IPCOM_PROC_PRIO_7
+     */
+    { "ipcom.telnet.task_priority", IPCOM_MAKE_STR(IPCOM_PRIORITY_DEFAULT) },
+#endif
+
+    { IP_NULL, IP_NULL }
+};
+
+
+/*
+ ****************************************************************************
+ * 6                   FUNCTIONS
+ ****************************************************************************
+ */
+
+
+/*
+ *===========================================================================
+ *                         iptelnets_configure
+ *===========================================================================
+ * Description:
+ * Parameters:
+ * Returns:
+ *
+ */
+IP_PUBLIC Ip_err
+iptelnets_configure(void)
+{
+    /* Set IPTELNETS system variables. */
+    (void)ipcom_sysvar_setv(iptelnets_conf_sysvar, 0);
+
+    return IPCOM_SUCCESS;
+}
+
+
+/*
+ ****************************************************************************
+ *                      END OF FILE
+ ****************************************************************************
+ */
+